Notes:

A. Continuous individual output ratings for unrestricted convection cooling. Combination of individual output loads must not exceed total power rating.

B. Peak rating for 60 s 10% duty cycle or continuous rating 150 LFM forced air cooling.

C. Adjustment on V1 varies all outputs simultaneously (1% on V1 @ 1% on V2 & V3).

D. Total combined current of V1 & V2 not to exceed 12 A. Combination of individual output loads must not exceed total power rating.

E. Total regulation is defined as maximum deviation from the initial set point. With all other outputs at 50% load, output under test can be varied from 0 to 100% load

and varied to any ac line voltage. Initial set point is 1% on V1, 2% on V2 and 3% on V3

F. Add “G” suffix to model number for RoHS compliant model.

Commercial

Model

Medical

Model

Output No.

Output

Output

Maximum (A)

Output

Maximum (B)

Total

Regulation (E)

V1 Adjustment

Note (C)

OVP Set-

point

Ripple/

Noise

GLC65A

GLM65A

1

2

3

+5.0 V

+12 V

-12 V

7 A

3 A

2.5 A

9A

5 A

4 A

2%

5%

6%

± 5%

—

—

6.2 ± 0.6 V

—

—

1%

1%

1%

GLC65B

GLM65B

1

2

3

+5.1 V

+15 V

-15 V

7 A

2.5 A

2 A

9 A

4 A

3 A

2%

4%

5%

± 5%

—

—

6.2 ± 0.6 V

—

—

1%

1%

1%

GLC65D

GLM65D

1

2

3

+5.0 V

+24 V

-12 V

7 A

1.5 A

2.5 A

9 A

2.5 A

4 A

2%

3%

6%

± 5%

—

—

6.2 ± 0.6 V

—

—

1%

1%

1%

GLC65E

GLM65E

1

2

3

+5.0 V

+24 V

+12 V

7 A

1.5 A

2.5 A

9 A

2.5 A

4 A

2%

3%

6%

± 5%

—

—

6.2 ± 0.6 V

—

—

1%

1%

1%

GLC65G

GLM65G

1

2

3

+5.0 V

+3.3 V

+12 V

5 A

4 A

2.5 A

8 A

5 A

4 A

3%

3%

6%

± 5%

—

—

6.2 ± 0.6 V

—

—

1%

1%

1%

GLC65H

GLM65H

1

2

3

+3.3 V

+5.0 V

+12 V

5 A

4 A

2.5 A

8 A

6 A

3 A

3.5%

4.5%

6%

± 5%

—

—

4.3 ± 0.8 V

—

—

1%

1%

1%

SL Power Electronics Corp., 6050 King Drive, Bldg. A, Ventura, CA 93003, USA. Phone:(805) 486 4565 Fax:(805) 487 8911 www.slpower.com Rev. 09/10/08. Data Sheet ©

2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication.

However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.

ENVIRONMENTAL SPECIFICATIONS OPERATING

NON-OPERATING

Temperature (A)

0 TO 50°C

-40 to +85°C

Humidity (A)

0 to 95% RH

0 to 95% RH

Shock (B)

20 g

pk

40 g

pk

Altitude

-500 to 10,000 ft

-500 to 40,000 ft

Vibration (C)

1.5 g

2

/Hz

5 g

2

/Hz

GLC65 MECHANICAL SPECIFICATIONS

A. Units should be allowed to warm up/operate under non-condensing con-

ditions before application of power. Derate output current and total output

power by 2.5% per °C above 50°C. For operation in a confined space, moving

air may be required. Under all conditions, the cooling vs. load profile should

be such that heat sinks and/or heatsink temperatures do not exceed 90 °C

for extended periods.

B. Shock testing—half-sinusoidal, 10 ± 3 ms duration, ± direction, 3 orthogo-

nal axes, total 6 shocks.

C. Random vibration—10 to 2000Hz, 6dB/octave roll-off from 350 to 2000Hz,

3 orthogonal axes. Tested for 10 min./axis operating and 1 hr./axis non-op-

erating.