 2013 - 2014 Microchip Technology Inc.

DS00001657B-page 3

SSC7102

1.0

CONNECTION INFORMATION

Reference: SSC7102 Sensor Fusion Bosch Module Schematic Revision 1.5 Assy. 6731

Note 1-1

A pull-down to ground is required on this pin. Use a 10K ohm resistor. Alternatively, these pins can

be combined with others that require a pull-down and connected as a group through a 1k ohm resistor

to ground.

SSC7102 Signal

Board Connection

SENSORA_SIG1

BMG_INT1

SENSORA_SIG2

BMG_INT2

SENSORA_SIG3

This pin must be pulled to ground through a resistor. (Note 1-1)

SENSORB_SIG1

BMC_INT1

SENSORB_SIG2

BMC_INT2

SENSORB_SIG3

BMC_INT3

SENSORB_SIG4

BMC_DRDY

SENSORB_SIG5

This pin must be pulled to ground through a resistor. (Note 1-1)

SENSORC_SIG1

ISL_INT#