SN74LVC2G14DBVT datasheet(4/24 Pages) TI1

4 / 24 page

SN74LVC2G14

SCES200O – APRIL 1999 – REVISED AUGUST 2015

www.ti.com

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

(1)

MIN

MAX

UNIT

VCC

Supply voltage

–0.5

6.5

Input voltage(2)

–0.5

6.5

Voltage applied to any output in the high-impedance or power-off state(2)

–0.5

6.5

Voltage applied to any output in the high or low state(2)(3)

–0.5

VCC + 0.5

IIK

Input clamp current

VI < 0

–50

IOK

Output clamp current

VO < 0

–50

Continuous output current

±50

Continuous current through VCC or GND

±100

Junction temperature

–65

150

°C

Tstg

Storage temperature

–65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended

Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

The input negative-voltage and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

(3)

The value of VCC is provided in the Recommended Operating Conditions table.

6.2 ESD Ratings

VALUE

UNIT

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V(ESD)

Electrostatic discharge

Charged-device model (CDM), per JEDEC specification JESD22-

±1000

C101(2)

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. Manufacturing with

less than 500-V HBM is possible with the necessary precautions. Pins listed as ±XXX V may actually have higher performance.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Manufacturing with

less than 250-V CDM is possible with the necessary precautions. Pins listed as ±YYY V may actually have higher performance.

6.3 Recommended Operating Conditions

See

(1)

MIN

MAX

UNIT

Operating

1.65

5.5

VCC

Supply voltage

Data retention only

1.5

Input voltage

5.5

Output voltage

VCC

VCC = 1.65 V

–4

VCC = 2.3 V

–8

IOH

High-level output current

–16

VCC = 3 V

–24

VCC = 4.5 V

–32

VCC = 1.65 V

VCC = 2.3 V

IOL

Low-level output current

VCC = 3 V

VCC = 4.5 V

Operating free-air temperature

–40

125

°C

(1)

All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,

Implications of Slow or Floating CMOS Inputs, SCBA004.

Submit Documentation Feedback

Product Folder Links: SN74LVC2G14

SN74LVC2G14DBVT Datasheet(PDF) 4 Page - Texas Instruments

SN74LVC2G14DBVT Datasheet(HTML) 4 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Datasheet Download

Link URL