VRG8684 datasheet(2/6 Pages) AEROFLEX

2 / 6 page

SCD8684 Rev C 10/2/12

Aeroflex Plainview

ABSOLUTE MAXIMUM RATINGS

Parameter

Rating

Units

Lead temperature (soldering 10 Sec)

300

°C

Input Output Differential

VDC

Load Current, maximum

6.0

ESD (MIL-STD-883, M3015, Class 2)

2000 to 3999

Operating Junction Temperature Range

-55 to +150

°C

Storage Temperature Range

-65 to +150

°C

Thermal Resistance (Junction to Case)

JC

2°C/W

NOTICE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are

stress rating only; functional operation beyond the "Operation Conditions" is not recommended and extended exposure

beyond the "Operation Conditions" may effect device reliability.

RECOMMENDED OPERATING CONDITIONS

Parameter

Range

Units

Output Voltage Range

1.25 to 23

VDC

Input Output Differential

1.8 to 24

VDC

Case Operating Temperature Range

-55 to +125

°C

ELECTRICAL PERFORMANCE CHARACTERISTICS 1/

UNLESS OTHERWISE SPECIFIED: -55°C

TC+125°C

Parameter

Symbol

Conditions (P

 PMAX)

Min

Max

Units

Reference Voltage 3/, 2/

VREF

1.5V < (VIN - VOUT) < 15V, 10mA < IOUT < 3.0A

1.210 1.275

Dropout Voltage 2/

VDROP1 VREF = 1%, IOUT = 5.0A

-1.8

Dropout Voltage 2/

VDROP2 VREF = 1%, IOUT = 3.0A

1.4

Line Regulation 3/, 2/ILOAD = 10mA, 1.5V < (VIN - VOUT) < 15V

0.5

Load Regulation 3/, 2/10mA < IOUT < 3.0A, (VIN - VOUT) = 3V

0.35

Adjust Pin Current 2/

-120

µA

Adjust Pin Current

Change 2/

10 mA < IOUT < 3.0A, 1.5V < (VIN - VOUT) < 15V

µA

Minimum Load Current

4/, 2/

IMIN

(VIN - VOUT) = 25V

Current Limit 2/ICL

(VIN - VOUT) = 5V

5.25

Ripple Rejection 3/

IOUT = 3.0A, (VIN - VOUT) = 3V, f = 120Hz,

CADJ = COUT = 25µF

Thermal Regulation

30ms pulse, TC = +25°C

0.04

%/W

VREF Long-Term Stability

Burn In: TC = +125°C @ 1000hrs minimum, Tested at +25°C.

1.0

Notes:

1/ The manufacturer’s output current rating for the RH1084MK positive regulator integrated circuit is 5.0 Amps. For Compliance with

the Current Density specifictation of MIL-STD-883 Rev. C, the electrical performance characteristics are specified at an output

current of 3.0 Amps.

2/ Specification derated to reflect total dose exposure to 100krads (Si) at +25°C.

3/ Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the

input/output differential voltage and the output current. Guaranteed maximum power dissipation will not be available over the full

input/output voltage range.

4/ Not tested. Shall be guaranteed by design, characterization, or correlation to other tested parameters.

VOUT

VIN

VOUT

IOUT

VRG8684 Datasheet(PDF) 2 Page - Aeroflex Circuit Technology

VRG8684 Datasheet(HTML) 2 Page - Aeroflex Circuit Technology

Html Pages

1 2 3 4 5 6

Datasheet Download

Link URL