AX88796L datasheet(14/71 Pages) ASIX

14 / 71 page

ASIX ELECTRONICS CORPORATION

AX88796 L

3-in-1 Local Bus Fast Ethernet Controller

2.4 EEPROM Signals Group

SIGNAL

TYPE

PIN NO.

DESCRIPTION

EECS

EEPROM Chip Select : EEPROM chip select signal.

EECK

O/PD

EEPROM Clock : Signal connected to EEPROM clock pin.

EEDI

EEPROM Data In : Signal connected to EEPROM data input pin.

EEDO

I/PU

EEPROM Data Out : Signal connected to EEPROM data output pin.

Tab - 4 EEPROM bus interface signals group

2.5 MII interface signals group(Optional)

SIGNAL

TYPE

PIN NO.

DESCRIPTION

RXD[3:0]

I/PU

98 – 95

Receive Data : RXD[3:0] is driven by the PHY synchronously with

respect to RX_CLK.

CRS

I/PD

100

Carrier Sense : Asynchronous signal CRS is asserted by the PHY

when either the transmit or receive medium is non-idle.

RX_DV

I/PD

102

Receive Data Valid : RX_DV is driven by the PHY synchronously

with respect to RX_CLK. Asserted high when valid data is present on

RXD [3:0].

RX_ER

(Omit)

No Support Receive Error : RX_ER ,is driven by PHY and synchronous to

RX_CLK, is asserted for one or more RX_CLK periods to indicate to

the port that an error has detected.

RX_CLK

I/PU

Receive Clock : RX_CLK is a continuous clock that provides the

timing reference for the transfer of the RX_DV,RXD[3:0] and

RX_ER signals from the PHY to the MII port of the repeater.

COL

I/PD

101

Collision : this signal is driven by PHY when collision is detected.

TX_EN

108

Transmit Enable : TX_EN is transition synchronously with respect to

the rising edge of TX_CLK. TX_EN indicates that the port is

presenting nibbles on TXD [3:0] for transmission.

TXD[3:0]

112 – 109

Transmit Data : TXD[3:0] is transition synchronously with respect to

the rising edge of TX_CLK. For each TX_CLK period in which

TX_EN is asserted, TXD[3:0] are accepted for transmission by the

PHY.

TX_CLK

I/PU

107

Transmit Clock : TX_CLK is a continuous clock from PHY. It

provides the timing reference for the transfer of the TX_EN and

TXD[3:0] signals from the MII port to the PHY.

MDC

O/PU

Station Management Data Clock : The timing reference for MDIO.

All data transfers on MDIO are synchronized to the rising edge of this

clock. The signal output reflects MDC register value. About MDC

MDC clock frequency is a 2.5MHz maximum accourding to IEEE

802.3u MII specification. Acturely, many PHYs are designed to accept

higher frequency than 2.5MHz.

MDIO

I/O/PU

Station Management Data Input/Output :Serial data input/output

transfers from/to the PHYs . The transfer protocol has to meet the

IEEE 802.3u MII specification. For more information, please refer to

section 6.5 CPU Access MII Station Management functions.

Tab - 5 MII interface signals group

AX88796L Datasheet(PDF) 14 Page - ASIX Electronics Corporation

AX88796L Datasheet(HTML) 14 Page - ASIX Electronics Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

Datasheet Download

Link URL