Filename: tfs 1237c.doc

Version 1.0

21.08.2013

Vectron International

Filter specification

TFS 1237C

3/5

Vectron International GmbH

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.

No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or

information.

Stability characteristics, reliability

After the following tests the filter shall meet the whole specification:

1. Shock:

500g, 1 ms, half sine wave, 3 shocks each plane;

DIN IEC 68 T2 - 27

2. Vibration:

10 Hz to 500 Hz, 0.35 mm or 5g respectively, 1 octave per min, 10 cycles per

plane, 3 planes; DIN IEC 68 T2 - 6

3. Change of

temperature:

-55 °C to 125°C / 15 min. each / 100 cycles

DIN IEC 68 part 2 – 14 Test N

4. Resistance to

solder heat (reflow):

reflow possible: three times max.;

for temperature conditions, see page 4: "Air reflow temperature conditions"

5. ESD

ANSI/ESD S20.20-1999, class 1A for HBM

This filter is RoHS compliant (2002/95/EG, 2005/618/EG)

Packing

Tape & Reel:

IEC 286 – 3, with exception of value for N and minimum bending radius;

tape type II, embossed carrier tape with top cover tape on the upper side;

max. pieces of filters per reel:

3000

reel of empty components at start:

min. 300 mm

reel of empty components at start including leader:

min. 500 mm

trailer:

min. 300 mm

Do

D1

P2

P1

Po

Ao

Pull Off Direction

PIN Marker

Typ

Date Code

Ko

t

A

C

N

W 1

W 2

The minimum bending radius is 45 mm.

Tape (all dimensions in mm)

W

:

8,00 ± 0,3

Po

:

4,00 ± 0,1

Do

:

1,50 +0,1/-0

E

:

1,75 ± 0,1

F

:

3,50 ± 0,05

G(min)

:

0,75

P2

:

2,00 ± 0,05

P1

:

4,00 ± 0,1

D1(min)

:

1,50

Ao

:

3,25 ± 0,1

Bo

:

3,25 ± 0,1

Ct

:

5,3

± 0,1

Reel (all dimensions in mm)

A

: 180

W1

:

8,4

+1,5/-0

W2(max)

: 14,4

N(min)

: 60

C

: 13,0

± 0,2