MICROWAVE CORPORATION

8 - 27

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order Online at www.hittite.com

8

Evaluation PCB

The circuit board used in the final application should use

RF circuit design techniques. Signal lines should have 50

ohm impedance while the package ground leads should be

connected directly to the ground plane similar to that shown

above. A sufficient number of VIA holes should be used to

connect the top and bottom ground planes. The evaluation

circuit board shown is available from Hittite upon request.

List of Material for Evaluation PCB 103743*

HMC286

v02.0204

GaAs MMIC LOW NOISE

AMPLIFIER, 2.3 - 2.5 GHz

Item

Description

J1, J2

PC Mount SMA Connector

J3, J4

DC Pin

U1

HMC286 Amplifier

PCB**

103741 Eval Board

**Circuit Board Material: Roger 4350

*Reference this number when ordering complete evaluation PCB.