Switch options

Model with leads, 8,1 mm from base to drill hole

NO lead, blue

NC lead, grey

COM lead,

black

Leads attached on

acutator side

Leads attached on side

opposite acutator

Model with leads, 5,2 mm

from base to drill hole

Switching point options

For customizing to individual requirements, switches in the DCJK family are available with four different switching points.

Rest position

Operating point

End position min. 7,7

Rest position

Operating point

End position min. 7,7

Rest position

Operating point

End position min. 7,7

Rest position

Operating point

End position min. 8,2

Terminals

Type of terminal available off-the-shelf:

Solder terminal, straight

Connecting leads on actuator side

Connecting leads opposite actuator side

Types of connector available on request:

Welding terminal

Solder terminal

Solder terminal, lateral

PCB terminal 0,8 x 0,5 straight

PCB terminal 0,6 x 0,5 straight

Auxiliary actuator options

Switches in the DC JK family have two mountings for attaching auxil-

iary actuators. This, combined with the range of actuators available in

the DC switch family and various operating points, means that a wide

variety of operating forces and travel combinations is feasible. To find

the perfect fit for your requirements, please contact us.

Further information and order codes on request.

45