Voltage Controlled Attenuator Module

5 - 2000 MHz

Rev. V4

G2 / SMG2

2

2

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

2

Ordering Information

1. The Connectorized version is not RoHS compliant.

Part Number

Package

G2

TO-8

SMG2

Surface Mount

MAAM-007987-000CG2

Parameter

Absolute Maximum

Short Term RF Input Power

(1 minute max.)

200 mW

Peak Power (3 µs max.)

1 W

DC Voltage

18 V

DC Bias Voltage

10 V

“S” Series Burn-In

Temperature

+125°C

Case Temperature

+125°C

Storage Temperature

-62°C to +125°C

2. Exceeding any one or combination of these limits may cause

permanent damage to this device.

3. MACOM does not recommend sustained operation near these

survivability limits.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

These

electronic

devices

are

sensitive

to

electrostatic discharge (ESD) and can be damaged

by static electricity. Proper ESD control techniques

should be used when handling these devices.

Typical Performance Curves

Attenuation vs. Control Voltage

Attenuation vs. Control Voltage vs. Frequency