TPS2390

TPS2391

SLUS471C – JUNE 2002 – REVISED OCTOBER 29, 2002

2

www.ti.com

ABSOLUTE MAXIMUM RATINGS (See Note 1)

TPS2390/1

UNIT

Input voltage range, all pins except RTN, EN, FAULT(2)

–0.3 V to 15

V

Input voltage range, RTN(2)

–0.3 V to 100

V

Input voltage range, EN(2)(3)

–0.3 V to 100

V

Output voltage range, FAULT(2)(4)

–0.3 V to 100

V

Continuous output current, FAULT

10

mA

Continuous total power dissipation

see Dissipation Rating Table

Operating junction temperature range, TJ

–55

_C to 125_C

_C

Storage temperature range, Tstg

–65

_C to 150_C

_C

Lead temperature soldering 1,6 mm (1/16 inch) from case for 10 seconds

260

_C

_C

NOTES 1: Stresses beyond those listed under ”absolute maximum ratings” may cause permanent damage to the device. These are stress ratings

only and functional operation of the device at these or any other conditions beyond those indicated under ”recommended operating

conditions” is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.

2: All voltages are with respect to –VIN (unless otherwise noted).

3: With 100-k

Ω minimum input series resistance, –0.3 V to 15 V with low impedance.

4: With 10-k

Ω minimum series resistance, –0.3 V to 80 V with low impedance.

ELECTROSTATIC DISCHARGE (ESD) PROTECTION

MIN

UNIT

Human Body Model (HBM)

1.5

kV

Charged Device Model (CDM)

1.5

kV

RECOMMENDED OPERATING CONDITIONS†

MIN

NOM

MAX

UNIT

Nominal input supply, –VIN to RTN

–80

–36

V

Operating junction temperature range

–40

85

_C

† All voltages are with respect to –VIN (unless otherwise noted)

DISSIPATION RATING TABLE

PACKAGE

TA < 25_C

POWER RATING

DERATING FACTOR

ABOVE TA = 25_C

TA = 85_C

POWER RATING

MSOP-8

420 mW

4.3 mW/

_C

160 mW

AVAILABLE OPTIONS

OPERATING

FAULT

PACKAGED DEVICES

OPERATING

TA

FAULT

OPERATION

PACKAGED DEVICES

MSOP (DGK)

40

_Cto85_C

Latch off

TPS2390DGK

–40

_C to 85_C

Periodically retry

TPS2391DGK