Product Specification

Series:

QMSS/QFSS High Speed Shielded Terminal 0.635 mm pitch

© 2004 Samtec, Inc.

Reviewed by:

JET

Revision: B

Specification:

PSQ-005

Approved by:

JT

Date:2/16/2011

Checked by:

JE

Page 2

5.0 ENVIRONMENTAL

5.1 Thermal Aging per EIA-364-17

5.1.1

No Evidence of Physical Damage seen --- PASS

5.1.2

Change in Contact LLCR did not exceed +15.0 milli-Ohms

(L- plating) --- PASS

5.1.3

Test Conditions

5.1.3.1 105 degrees C

5.1.3.2 250 hours

5.2 Cyclic Humidity per EIA-364-31

5.2.1

No Evidence of Physical Damage seen --- PASS

5.2.2

Insulation Resistance > 5000 Meg Ohms --- PASS

5.2.3

No evidence of Breakdown or Arcing when applying 750 VAC

--- PASS

5.2.4

Change in LLCR not to exceed +15.0 milli-Ohms (L- plating) --- PASS

5.2.5

Test Conditions

5.2.5.1 Cyclic 25 degrees C to 65 degrees C for 240 hours,

at 90% to 95% RH

5.2.5.2 Time Condition "B" (240 hours) for Method III,

excluding sub-cycle 7A and 7B

5.3 Thermal Shock per EIA-364-32

5.3.1

No Evidence of Physical Damage seen --- PASS

5.3.2

Change in Signal LLCR did not exceed +15 mOhm --- PASS

5.3.3

No evidence of Breakdown or Arcing when applying 700 VAC

5.3.4

Insulation Resistance > 5000 Meg Ohms --- PASS

5.3.5

Test Conditions

5.3.5.1 # Thermal Cycles: 100

5.3.5.2 Hot Temp: 85 degrees C +3 degrees C/-0 degrees C

5.3.5.3 Cold Temp: -55 degrees C +0 degrees C/-3 degrees C

5.3.5.4 Dwell/Configuration: 30 Minutes, Mated and Mounted

5.3.5.5 Hot/Cold Transition: Instantaneous

5.4 Mechanical Shock per EIA-364-27

5.4.1

Change in Signal LLCR did not exceed +15 mOhm --- PASS

5.4.2

Test Conditions

5.4.2.1 Peak Value: 100 G

5.4.2.2 Duration: 6 milliSec

5.4.2.3 Waveform: Sawtooth

5.4.2.4 Velocity: 11.3 FPS

5.4.2.5 # Shocks/Direction: 3 Shocks/3 Axes (18 total)