TUD4010 datasheet(2/3 Pages) ETC

2 / 3 page

D---4

0 H

Hiiig

h P

rrfffo

rrm

e B

Bllla

e S

rrv

D---4

0 S

ciiifffiiic

atttiiio

Chassis Overall

• Accommodates hot-pluggable slots:

10 Server Blades at the front

2 Switch Blades at the rear

2 Management Blades at the rear

3+1 redundant power supplies at the rear

2 (1+1) high performance fan modules at the rear

• Passive mid-plane supports dual gigabit LAN and dual

AMPC management

• (3+1) Power Supply maximum output: 1800W+600W

Auto-sensing 110-240V AC

600W maximum rate power per power supply

• Rack mountable 4U chassis: 6.88”(H) x 16.7”(W)

x 27.5”(D)

• Weight: 128lbs (Full load); 80lbs (Base unit)

Server Blade Specification (SB4010Xe)

• CPU: High performance and low power consumption Intel

LV Xeon processor running at 2.4GHz

• Memory: Supports up to 8GB of ECC registered DDR266

memory (Four DIMM slots)

• Intel chipset: E7501

• One low-profile PCI-X Slot

• Accommodates single IDE, 2.5” hard disk drive

• Dual 1Gbs Ethernet NICsConnect to 2 switch blades

• Integrated MCOP (Management CO-Processor): Custom

chip facilitating server blade management by ManageSite

• Video controller with VGA and SVGA resolutions

• Integrated KVM (USB Keyboard, Video, USB mouse)

connector at front

enables attended installation of OS and

applications

• Supports external USB CDROM , flash memory and FDD

• Activity indicator LEDsfor CPU, primary and secondary

networks, and HDD

• Dimensions:6.5”(H)x1.65”(W)x15.6”(D)

Software

• OS support: Windows™ 2000, Windows Server 2003 and

Linux.

Rapid deployment support: Windows® 2000, Windows

Server 2003 and Linux Redhat™9.0, AS2.1 and AS3.0

• PXE-enabled BIOSfacilitates network-based OS and

application installation

• Server Management Agent (SMA): Optional software

component works in conjunction with MCOP chip to facilitate

server blade management by ManageSite™

Switch Blades Specification

• IEEE Layer 2 Ethernet switch

• Supports VLAN, trunking and mirroring

• The VLAN and trunking configuration can be done through a

local serial port or remote management software

(ManageSite)

• Delivers 10:1 Ethernet cable consolidation for TUD-4010

based servers, eliminating the cable management problem

for data centers

• 1Gbs ports support:

3 RJ45 external uplink ports

10 Ser/Des to Server Blades

2 Ser/Des to Management Blades

1 Ser/Des to the other switch blades

• Supports half-duplex and full-duplex communication

• Auto-negotiation for speed, flow and duplex control for 1Gbs

ports

• Supports IEEE 802.1 and IEEE 802.3x flow control

• Up to 2 redundant, hot-swap switch blades

• Same switch blade with TUD-3114

Management Blades

• High performance embedded processor / IO processors for

hardware and routing control

• Internal AMPC serial channel (star network) communication

controller to monitor voltage, temperature, speed of each

blade and module. It has the capability to cycle power, shut

down and reset any module.

• Two internal Ethernet ports to provide redundant

communication to internal and external networks. One

external Ethernet for remote out of band control

• Automatic switch over for high availability

• Redirect serial console of any server blade over Ethernet for

remote terminal server function

• One DB9 serial port for software installation

• Supports Wake on LAN

• Up to 2 redundant, hot-swap

• Supported by ManageSite™ Software

• Same management blade with TUD-3114

TUD-4010 Rear View

TUD4010 Datasheet(PDF) 2 Page - List of Unclassifed Manufacturers

TUD4010 Datasheet(HTML) 2 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3

Datasheet Download

Link URL