RN42 datasheet(16/26 Pages) MICROCHIP

16 / 26 page

RN42/RN42N

DS50002328A-page 16

 2015 Microchip Technology Inc.

3.6

Japan

The RN42 module has received type certification and is

labeled with its own technical conformity mark and cer-

tification number as required to conform to the techni-

cal standards regulated by the Ministry of Internal

Affairs and Communications (MIC) of Japan pursuant

to the Radio Act of Japan.

Integration of this module into a final product does not

require additional radio certification provided installa-

tion instructions are followed and no modifications of

the module are allowed. Additional testing may be

required:

• If the host product is subject to electrical appli-

ance safety (for example, powered from an AC

mains), the host product may require Product

Safety Electrical Appliance and Material (PSE)

testing. The integrator should contact their confor-

mance laboratory to determine if this testing is

required.

• There is an voluntary Electromagnetic Compatibil-

ity (EMC) test for the host product administered

by VCCI: http://www.vcci.jp/vcci_e/index.html.

3.6.1

LABELING AND USER

INFORMATION REQUIREMENTS

The label on the final product which contains the RN42

module must follow Japan marking requirements. The

integrator of the module should refer to the labeling

requirements for Japan available at the Ministry of

Internal Affairs and Communications (MIC) website.

The RN42 module is labeled with its own technical con-

formity mark and certification number. The final product

in which this module is being used must have a label

referring to the type certified module inside:

3.6.2

HELPFUL WEB SITES

Ministry of Internal Affairs and Communications (MIC):

http://www.tele.soumu.go.jp/e/index.htm

Association of Radio Industries and Businesses

(ARIB): http://www.arib.or.jp/english

3.7

Korea

The RN42 module has received certification of confor-

mity in accordance with the Radio Waves Act. Integra-

tion of this module into a final product does not require

additional radio certification provided installation

instructions are followed and no modifications of the

module are allowed.

3.7.1

LABELING AND USER

INFORMATION REQUIREMENTS

The label on the final product which contains the RN42

module must follow KC marking requirements. The

integrator of the module should refer to the labeling

requirements for Korea available on the Korea Com-

munications Commission (KCC) website.

The RN42 module is labeled with its own KC mark. The

final product requires the KC mark and certificate num-

ber of the module:

3.7.2

HELPFUL WEB SITES

Korea Communications Commission (KCC):

http://www.kcc.go.kr

National Radio Research Agency (RRA):

http://rra.go.kr

3.8

Taiwan

The RN42 module has received compliance approval

in accordance with the Telecommunications Act. Cus-

tomers seeking to use the compliance approval in their

product should contact Microchip Technology sales or

distribution partners to obtain a Letter of Authority.

Integration of this module into a final product does not

require additional radio certification provided installa-

tion instructions are followed and no modifications of

the module are allowed.

3.8.1

LABELING AND USER

INFORMATION REQUIREMENTS

The RN42 module is labeled with its own NCC mark

and certificate number as below:

RN42 Datasheet(PDF) 16 Page - Microchip Technology

RN42 Datasheet(HTML) 16 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Datasheet Download

Link URL