LPS60-M Series Data Sheet

Environmental Specifications

Operating temperature

0° to 50 °C ambient. Derate each output as 2.5% per degree from 50° to 70 °C, -20 °C startup

Storage temperature

-40 °C to +85 °C

Electromagnetic susceptibility

Designed to meet IEC61000-4-2, -4-3, -4-4, -4-5, -4-6, Level 3

Humidity

Operating; non-condensing 5% to 95% RH

Vibration

Three orthogonal axes, sweep at 1cot/min, 5 min.dwell at four major resonances 0.75G peak 5Hz to

500 Hz, operational

Temperature coefficient

±0.04% per °C

MTBF demonstrated

> 550,000 hours at full load and 25 °C ambient conditions

Ordering Information

Model

Number

Output

Voltage

Minimum

Load

Maximum Load

with Convection

Cooling

Maximum Load

with 30CFM

Forced Air

Ripple

LPS63-M

12 V

0A

5 A

6.7 A

7.5 A

± 2%

120 mV

LPS64-M

15 V

0A

4 A

5.3 A

6 A

± 2%

150 mV

LPS65-M

24 V

0A

2.5 A

3.3 A

3.8 A

± 2%

240 mV

1. Peak current lasting < 30 seconds with a maximum 10% duty cycle.

2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.

3. Peak-to-peak with 20 MHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0. μF capacitor at rated line voltage and load ranges.

4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as

a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and

System Integrators, including through Distribution Channels. It is not intended for sale to End Users.

Power Derating Curve

Output

Power

(Watts)

0°C

20W

40W

60W

80W

10°C 20°C 30°C 40°C 50°C 60°C 70°C

TA – Ambient Temperature – °C

0W

Natural

Convection

Cooling

40W

30W

30 CFM Forced Air Cooling