MEMS Oscillator, Ultra Performance, High Freq., LVCMOS/ HCMOS Compatible, 80.0 MHz to 220.0MHz

IM811 Series

ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●

www.ilsiamerica.com

Specifications subject to change without notice

Rev: 01/30/16_A

Page 1 of 7

Features:



MEMS Technology



Direct pin to pin drop-in replacement for industry-standard packages



Ultra-low phase jitter: 0.5 pSec (12 kHz to 20 MHz)



LVCMOS/HCMOS Compatible Output



Industry-standard package 2.5 x 2.0, 3.2 x 2.5, and 5.0 x 3.2 mm x mm



Pb-free, RoHS and REACH compliant



Fast delivery times

Typical Applications:



Fibre Channel



Server and Storage



GPON, EPON



100M / 1G /10G Ethernet

Electrical Specifications:

Frequency Range

80.000 MHz to 220.000MHz

Frequency Stability

See Part Number Guide

Inclusive of Initial Tolerance, Operating Temperature Range, Load, and

Voltage

Operating Temperature

See Part Number Guide

Supply Voltage (Vdd) ±10%

See Part Number Guide

Current Consumption

34 mA typ./ 36 mA max

30 mA typ./ 33 mA max

No load condition, f = 100 MHz, Vdd = +2.5 V, +2.8 V or +3.3 V

No load condition, f = 100 MHz, Vdd = +1.8V

OE Disable Current

31 mA max

30 mA max

Vdd = +2.5 V, +2.8 V or +3.3 V, OE = GND

Vdd = +1.8 V, OE = GND

Standby Current

70 µA max

10 µA max

Vdd = +2.5 V, +2.8 V or +3.3 V,

ST = GND

Vdd = +1.8 V,

ST = GND

Waveform Output

LVCMOS/HCMOS

Symmetry

45%/55%

40%/60%

F = less than 165 MHz all Vdds

F = greater than 165 MHz all Vdds

Rise / Fall Time

1.2 nSec typ./ 2.0 nSec max

15 pF Load, 10% to 90% of Vdd

Logic “1”

90% of Vdd min

Logic “0”

10% of Vdd max

Input Voltage High

70% of Vdd min

Pin 1, OE or

ST

Input Voltage Low

30% of Vdd max

Pin 1, OE or

ST

Input Pull-up Impedance

100 kΩ typ./ 250 kΩ max

2.0 MΩ min

Pin 1, OE logic high or logic low, or

ST logic high

Pin 1,

ST logic low

Startup Time

7 mSec typ./ 10 mSec max

Measured from the time Vdd reaches its rated minimum values

OE Enable/Disable Time

115 nSec max

F= 80 MHz, For other frequencies, T_oe = 100 nSec = 3 cycles

Resume Time

10 mSec max

In standby mode, measured from the time

ST pin crosses 50% threshold.

RMS Period Jitter

1.5 pSec typ./ 2.0 pSec max

2.0 pSec typ./ 3.0 pSec max

F = 156.25 MHz, Vdd = +2.5 V,+2.8 V or +3.3 V

F = 156.25 MHz, Vdd = +1.8 V

RMS Phase Jitter (random)

0.5 pSec typ./ 1.0 pSec max

F = 156.25 MHz, Integration bandwidth = 12 kHz to 20 MHz

First year Aging

±1.5 ppm

At +25ºC ±2ºC

10-years Aging

±5.0 ppm

At +25ºC ±2ºC

Notes:



All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated.



Typical values are at +25ºC and nominal supply voltage.

Absolute Maximum Limits

Storage Temperature

-65ºC to +150ºC

Supply Voltage (Vdd)

-0.5 VDC to 4.0 VDC

Electrostatic Discharge

2000 V max

Solder Temperature (follow standard Pb free soldering guidelines)

260ºC max

Junction Temperature

150ºC max