IRS2452AM

23

Rev. 1.2

2016-10-05

Published by

Infineon Technologies AG

81726 München, Germany

All Rights Reserved.

IMPORTANT NOTICE

Legal Disclaimer

The information given in this document shall in no event be regarded as a guarantee of conditions or

characteristics (“Beschaffenheitsgarantie”) . With respect to any examples, hints or any typical values stated

herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims

any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of

intellectual property rights of any third party.

In addition, any information given in this document is subject to customer’s compliance with its obligations stated

in this document and any applicable legal requirements, norms and standards concerning customer’s products

and any use of the product of Infineon Technologies in customer’s applications.

The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of

customer’s technical departments to evaluate the suitability of the product for the intended application and the

completeness of the product information given in this document with respect to such application.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest

Infineon Technologies Office (www.infineon.com).

Warnings

Due to technical requirements, components may contain dangerous substances. For information on the types in

question, please contact the nearest Infineon Technologies Office.

The Infineon Technologies component described in this Data Sheet may be used in life-support devices or

systems and/or automotive, aviation and aerospace applications or systems only with the express written

approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the

failure of that life-support, automotive, aviation and aerospace device or system or to affect the safety or

effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human

body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume

that the health of the user or other persons may be endangered.