HDI Series

Amplified pressure sensors

2/9

E / 11650 / G

www.first-sensor.com

www.sensortechnics.com

Specification notes:

1. Proof pressure is the maximum pressure which may be applied without causing durable shifts of the electrical parameters of the

sensing element.

2. Burst pressure is the maximum pressure which may be applied without causing damage to the sensing element or leaks to the

housing.

3. Full Scale Span (FSS) is the algebraic difference between the output signal for the highest and lowest specified pressure.

4. Total accuracy is the combined error from offset and span calibration, linearity, pressure hysteresis, and temperature effects.

Linearity is the measured deviation based on a straight line. Hysteresis is the maximum output difference at any point within the

operating pressure range for increasing and decreasing pressure. Calibration errors include the deviation of offset and full scale

from nominal values.

5. Extended temperature ranges on request. Please contact First Sensor.

6. Max. delay time between pressure change at the pressure die and signal change at the output.

7. The response time depends on the adjusted internal A/D resolution of the sensor. For 12 bit it is typ. 0.5 ms. Other A/D resolutions

and reponse time are available on request. Please contact First Sensor for further information.

8. Sensors with lower current consumption are available on request. Please contact First Sensor for further information.

Part no.

Operating pressure

HDIM010...B...

0...±10 mbar

150 mbar

200 mbar

HDIM020...B...

0...±20 mbar

150 mbar

200 mbar

HDIM050...B...

0...±50 mbar

550 mbar

800 mbar

HDIM100...B...

0...±100 mbar

1 bar

1.5 bar

HDIM200...B...

0...±200 mbar

1 bar

1.5 bar

HDIM500...B...

0...±500 mbar

1 bar

1.5 bar

HDIB001...B...

0...±1 bar

2 bar

3 bar

HDIM010...U...

0...10 mbar

150 mbar

200 mbar

HDIM020...U...

0...20 mbar

150 mbar

200 mbar

HDIM050...U...

0...50 mbar

550 mbar

800 mbar

HDIM100...U...

0...100 mbar

1 bar

1.5 bar

HDIM200...U...

0...200 mbar

1 bar

1.5 bar

HDIM500...U...

0...500 mbar

1 bar

1.5 bar

HDIB001...U...

0...1 bar

2 bar

3 bar

HDIB002...U...

0...2 bar

4 bar

6 bar

HDIB005...U...

0...5 bar

7 bar

7 bar

HDI0611AR...

600...1100 mbar(a)

2 bara

3 bara

HDI0811AR...

800...1100 mbar(a)

2 bara

3 bara

Other pressure ranges are available on request. Please contact First Sensor.

PRESSURE SENSOR CHARACTERISTICS

(T