408- 10376

Rev B

2

of 2

Figure 2

Figure 3

1

1

2

2

3

3

4

4

Plunger (Ref

Plunger (Ref

Wire

Wire

Wire

Wire

Plug

Contact Cavity

Releasing Barrel

Releasing Barrel

Socket

Contact

Pin

Contact

Locking Lances

4. MAINTENANCE AND INSPECTION

To ensure proper operation, the tool should conform

to the dimensions provided in Figure 4. It is

recommended that the tool be inspected immediately

on its arrival and at regularly scheduled intervals. The

tool is not repairable and should be replaced when

worn or damaged. It is recommended that the tool be

stored in a clean, dry place and cleaned with a soft,

lint--free cloth.

Additional tools can be purchased from:

TYCO ELECTRONICS CORPORATION

CUSTOMER SERVICE (38--35)

P. O. BOX 3608

HARRISBURG, PA 17105--3608

5. REVISION SUMMARY

S

Updated document to corporate requirements.

Figure 4

19.05 [.750] Ref

2.03 [.080] Ref

2.54 [.100] Ref

60.60 [2.386] Ref

NOTE:

Not to Scale