ST

Sitronix

ST8016

PRELIMINARY

160 Output LCD Common/Segment driver IC

Notice: This is not a final specification. Some parameters are subject to change

V0.32

2001-Aug-29

1. DESCRIPTION

The ST8016 is a 160-output segment/common driver

IC suitable for driving large/medium scale dot matrix

LCD panels, and is used in personal computers/work

stations. Through the use of SST (Super Slim TCP)

technology, it is ideal for substantially decreasing the

size of the frame section of the LCD module. The

ST8016 is good both as a segment driver and a

common driver, and it can create a low power

consuming, high-resolution LCD.

2. FEATURES

Number of LCD drive outputs: 160

Supply voltage for LCD drive: +15.0 to +40.0 V

Supply voltage for the logic system: +2.5 to +5.5 V

Low power consumption

Low output impedance

Package: 186-pin TCP (Tape Carrier Package)

(Segment mode)

Shift clock frequency

Adopts a data bus system

4-bit/8-bit parallel input modes are selectable with a

mode (MD) pin

Automatic transfer function of an enable signal

Automatic counting function which, in the chip

selection mode, causes the internal clock to be

stopped by automatically counting 160 bits of input

data

Line latch circuits are reset when DISPOFF active

(Common mode)

Shift clock frequency: 4 MHz (MAX.)

Built-in 160-bit bi-directional shift register (divisible

into 80 bits x 2)

Available in a single mode (160-bit shift register) or

in a dual mode (80-bit shift register x 2)

The above 4 shift directions are pin-selectable

Shift register circuits are reset when DISPOFF active

3. PIN CONNECTIONS

1

160

161

186

LP

DISPOFF

XCK

S/C

FR

L/R

MD

186 PIN TCP