EEJ Series

3

Cost-effective Medium Performance Power Inlet Filter

153

Dimensions are in inches and millimeters unless otherwise specified. Values in italics

are metric equivalents. Dimensions are shown for reference purposes only.

Specifications subject to change.

Corcom Product Guide

Catalog: 1654001

Issue Date: 06.2011

For email, phone or live chat, please go to

te.com/help

corcom.com

• Compact EMI filter with IEC 60320-1 C14 Inlet

• Enhanced two element circuit provides medium

attenuation to 30MHz

• Compact and cost-effective design

• Supersedes most ED Series versions

• Includes 20A version with standard IEC 60320-1

C20 inlet

• Several termination styles

• Flanged mounting

• Same performance as the EEJ Series

• Snap-in mounting

• Several termination styles

• Includes 20A version with standard IEC 60320-1

C20 inlet

• Minimal leakage current suitable for patient-

contact medical applications

• Flanged mounting the same as the EEJ Series

• Also available in snap-in versions (EJHS)

• Two element circuit provides modest EMI

attenuation above 1MHz

• Capacitive input (refer to the H Series for

capacitive output)

• EJHS models feature snap-in mounting

UL Recognized

CSA Certified

VDE Approved*

Maximum leakage current each Line to Ground:

EEJ/EJS

EJH

EJM

@ 120 VAC 60 Hz:

.22 mA

2

A

.01 mA

@250 VAC 50 Hz:

.38 mA

5

A

.017 mA

Hipot rating (one minute):

Line to Ground:

2250 VDC

Line to Line:

1450 VDC

Rated Voltage (max.):

250 VAC

Operating Frequency:

50/60 Hz

Rated Current:

1 to 20A*

Operating Ambient Temperature Range

(at rated current Ir):

-10°C to +40°C

In an ambient temperature (Ta) higher than +40°C

the maximum operating current (Io) is calculated as

follows: Io = Ir (85-Ta)/45

Specifications

Electrical Schematic

LINE

LOAD

1

Note 1: Not present in EJH versions

1

20EJH1

20EEJ8

3EEJ1

*15A versions are tested by Underwriters Laboratories

to US and Canadian requirements and are

VDE approved at 10A, 250VAC

20A versions are tested by Underwriters Laboratories

to US and Canadian requirements and are

VDE approved at 16A, 250VAC

• Low leakage current, suitable for most medical

applications

• Improved EMI attenuation up to 200MHz

• Mechanically the same as the EEJ Series with

flange or snap-in mounting

• EJMS models feature snap-in mounting

EJS Models

EJM & EJMS Models

EJH & EJHS Models

EEJ Series

Including the EJH/EJHS, EJM/EJMS and EJS Models