| Electronic Components Datasheet Search |
|
408-10034 Datasheet(PDF) 2 Page - Tyco Electronics |
|
|
|||||||||||||||||||||||||||||
408-10034 Datasheet(HTML) 2 Page - Tyco Electronics |
|
2 / 5 page ![]() 408-10034 2 of 5 Rev B Figure 2 1. Remove quick pins from the adapter assembly. Refer to Figure 1. 2. Insert crimping head into the adapter assembly. 3. After the crimping head is properly aligned, insert the quick pins through the two holes in the adapter and through the holes in the crimp head. The quick pins will “snap” into position when they are properly inserted. 3.2. Removal To avoid personal injury, ALWAYS disconnect the battery from the tool before removing crimping head. Remove the quick pins from the crimping head; then remove the crimping head from the tool holder. 4. CRIMPING PROCEDURES To avoid personal injury, ALWAYS keep fingers clear of crimping jaws when operating the tool. Never place anything within the crimping jaws except Tyco Electronics terminals or splices. 1. Strip wire to dimensions shown in Figure 2. DO NOT nick wire strand or use wires with nicked or missing conductor strands. 2. Center the terminal or splice wire barrel in the appropriate crimp chamber. For terminals, make sure that the flat side of the tongue faces the anvil. For splices, make sure that the brazed seam, (when visible), is towards the indenter. See Figure 3. 3. Depress the trigger to advance the moving ram. This closes the crimp jaws in order to hold the terminal in place. DO NOT deform the wire barrel. 4. Insert stripped wire into terminal or splice making sure the wire insulation does not enter the wire barrel. 5. Activate the tool to complete the crimp. The crimp tool automatically returns to the first position of the cycle when the crimp is complete. 6. To crimp the other half of the butt splice, position the uncrimped wire barrel into the crimping chamber, and repeat the crimping procedure. If the splice cannot be turned for crimping the other half, rotate the crimping head. 7. Refer to Section 5 and Figure 4 for crimp inspection. CRIMPING HEAD WIRE SIZE (AWG) RANGE (and Terminal Size) USE TOOL CRIMPING CHAMBER MARKED WIRE STRIP LENGTH TERMINAL (Standard) TERMINAL (Long Barrel) BUTT SPLICE PARALLEL SPLICE 1-46447-0 22-16 22-16 4.37-5.16 [.172-.203] - - 6.35-7.14 [.250-.281] 7.94-8.73 [.313-.344] 16-14 16-14 12-10 12-10 6.35-7.14 [.250-.281] 1-49935-0 22-16 22-16 4.37-5.16 [.172-.203] 6.35-7.14 [.250-.281] 6.35-7.14 [.250-.281] 7.94-8.73 [.313-.344] 16-14 16-14 12-10 12-10 6.35-7.14 [.250-.281] - - 1-69363-0 26-24 26-24 3.17-3.97 [.125-.156] - - 3.57-4.37 [.141-.172] - - 22-20 22-20 4.37-5.16 [.172-.203] - - 5.16-5.95 [.203-.234] 24-20 22-20 - - - - 4.37-5.16 [.172-.203] Terminal Wire Strip Length Wire Barrel Strap Type Butt Splice Parallel Splice Note: Not to Scale NOTE i DANGER STOP DANGER STOP |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |