TOCP172−

2001-07-26

2

3. Precautions for Operation

(1)

The maximum ratings are the limit values which should not be exceeded when using this product. All

of these values must be within the defined range. If the maximum ratings, are exceeded the deviced

characteristics may not be recoverable and, in extreme cases, permanent damage to the product may

result.

Care should be taken not to exceed the maximum ratings when using this product.

(2)

Care should be taken not to drop heavy objects onto the optical fiber cables.

(3)

When connecting or disconnecting the optical fiber with fiber optic connector, be sure to hold the fiber

optic connector. Do not hold the optical fiber cable when connecting or disconnecting.

(4)

When inserting the fiber optic connector into the fiber optic transmitting/receiving module, be sure to

follow the correct fitting alignment.

(5)

Keep the end face of the optical fiber with fiber optic connector clean. If contaminated, wipe it gently

with tissue paper.

(6)

When bending the optical fiber cable to install it, note that the recommended bending radius is six to

ten times longer than the minimum bending radius.

(7)

−

connector or optical fiber products. The length of the optical fiber is the distance from one end of fiber

optic connector to the other end. The minimum fiber length is 0.2m.

EX.

TOCP172−1MB

Unit of length

C: cm

M: m

Length