NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.

℃

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Under parallel

operation of more than one rack connecting together, ripple of the output voltage may be higher than the SPEC at light load condition. It will go back to

normal ripple level once the output load is more than 10%. .

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on

a

mm*

mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.

720

360

For guidance on how to

perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)

5. Derating may be needed under low input voltages. Please check the derating curve for more details.

6. Output of all the RCP-1000 modules are connected in parallel in the rack.

SPECIFICATION - Power Supply System

RCP-3K1U

-12

□

RCP-3K1U

-24

□

RCP-3K1U

-48

□

MODEL

VOLTAGE RANGE

Note.5

RECTIFIER

OUTPUT VOLTAGE

RACK SHELF

MAX. OUTPUT CURRENT

FREQUENCY RANGE

INPUT

OUTPUT

LEAKAGE CURRENT

AC CURRENT (Typ.)PER MODULE

90 ~ 264VAC

127 ~ 370VDC

2160W

3024W

180A

63A

12V

RCP-1UI or RCP-1UT

48V

RCP-1000-12

RCP-1000-24

RCP-1000-48

47 ~ 63Hz

<3.5mA / 230VAC

8.5A/115VAC

4.5A/230VAC

10.5A/115VAC

5.5A/230VAC

11A/115VAC

5.5A/230VAC

SAFETY STANDARDS

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

DIMENSION

PACKING

OTHERS

UL60950-1, TUV EN60950-1 approved

-20 ~ +60

(Refer to "Derating Curve")

℃

20 ~ 90% RH non-condensing

-40 ~ +85

, 10 ~ 95% RH

℃

±℃

℃

0.02%/

(0 ~ 50

)

10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

Rack 483.6*350.8*44(L*W*H)

ENVIRONMENT

I/P-O/P:3KVAC

I/P-FG:2KVAC

O/P-FG:0.7KVDC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25

/ 70% RH

℃

13.2Kg; 1pcs/13.2Kg/2.67CUFT

REMOTE SENSE

REMOTE ON-OFF CONTROL

AUXILIARY POWER

By electrical signal or dry contact

ON:short

OFF:open

5V @ 0.3A

FUNCTION

SAFETY &

EMC

(Note 4)

2880W

120A

24V

Logic " High" for over temperature warning, Please refer to the Installation Manual, isolated signal

OVER TEMP WARNING

Adjustment of output voltage is allowable to 90 ~ 110% of nominal output voltage. Please refer to the Function Manual.

Compensate voltage drop on the load wiring up to 0.5V.

OUTPUT VOLTAGE PROGRAMMABLE

AC OK SIGNAL

DC OK SIGNAL

The isolated TTL signal out, Please refer to the Installation Manual

The isolated TTL signal out, Please refer to the Installation Manual

File Name:RCP-1U Rack System-SPEC 2016-07-26

EMC IMMUNITY

EMC EMISSION

Parameter

Parameter

ESD

Radiated

EFT / Burst

Surge

Conducted

Magnetic Field

Voltage Dips and Interruptions

Conducted

Radiated

Harmonic Current

Voltage Flicker

EN55024 , EN61204-3, EN61000-6-2

Standard

Standard

EN55022 (CISPR22) / EN55011 (CISPR11)

EN55022 (CISPR22) / EN55011 (CISPR11)

EN61000-3-2

EN61000-3-3

EN61000-4-2

EN61000-4-3

EN61000-4-4

EN61000-4-5

EN61000-4-6

EN61000-4-8

EN61000-4-11

Test Level / Note

Test Level / Note

Level 3, 8KV air ; Level 2, 4KV contact

Level 3

Level 3

Level 3

Level 4

>95% dip 0.5 periods, 30% dip 25 periods,

>95% interruptions 250 periods

Class B

Class B

-----

-----

1000 ~ 3000W 1U Distributed Power System

RCP-1U Rack System

Level 4, 4KV/Line-Earth ; Level 3, 2KV/Line-Line