LM4880M datasheet(3/12 Pages) NSC

3 / 12 page

Absolute Maximum Ratings (Note 2)

If Military/Aerospace specified devices are required,

please contact the National Semiconductor Sales Office/

Distributors for availability and specifications.

Supply Voltage

6.0V

Storage Temperature

−65˚C to +150˚C

Input Voltage

−0.3V to V

DD + 0.3V

Power Dissipation (Note 3)

Internally limited

ESD Susceptibility (Note 4)

3500V

ESD Susceptibility (Note 5)

250V

Junction Temperature

150˚C

Soldering Information

Small Outline Package

Vapor Phase (60 sec.)

Infrared (15 sec.)

215˚C

220˚C

See AN-450 “Surface Mounting and their Effects on

Product Reliability” for other methods of soldering surface

mount devices.

Thermal Resistance

JC (DIP)

37˚C/W

JA (DIP)

107˚C/W

JC (SO)

35˚C/W

JA (SO)

170˚C/W

Operating Ratings

Temperature Range

MIN≤TA≤TMAX

−40˚C

≤T

A≤+85˚C

Supply Voltage

2.7V

≤V

DD≤5.5V

Electrical Characteristics (Notes 1, 2)

The following specifications apply for V

DD = 5V unless otherwise specified. Limits apply for TA = 25˚C.

Symbol

Parameter

Conditions

LM4880

Units

(Limits)

Typical

Limit

(Note 6)

(Note 7)

Supply Voltage

2.7

V (min)

5.5

V (max)

Quiescent Power Supply Current

IN=0V, IO=0A

3.6

6.0

(max)

Shutdown Current

PIN5=VDD

0.7

µA

(max)

Output Offset Voltage

IN=0V

(max)

Output Power

THD=0.1% (max); f=1 kHz;

L=8Ω

250

200

(min)

L=32Ω

THD+N=10%;f=1 kHz

L=8Ω

325

L=32Ω

110

THD+N

Total Harmonic Distortion+Noise

L=8Ω,PO=200 mW;

0.03

L=32Ω,PO=75 mW;

0.02

f=1 kHz

PSRR

Power Supply Rejection Ratio

B = 1.0 µF,

RIPPLE=200 mVrms, f = 100 Hz

Note 1: All voltages are measured with respect to the ground pin, unless otherwise specified.

Note 2: Absolute Maximum Ratings indicate limits beyond which damage may occur. Operating Ratings indicate conditions for which the device is functional, but do

not guarantee specific performance limits. Electrical Characteristics state DC and AC electrical specifications under particular test conditions which guarantee specific

performance limits. This assumes that the device is within the Operating Ratings. Specifications are not guaranteed for parameters where no limit is given, however,

the typical value is a good indication of device performance.

Note 3: The maximum power dissipation must be derated at elevated temperatures and is dictated by TJMAX, θJA, and the ambient temperature TA. The maximum

allowable power dissipation is PDMAX = (TJMAX −TA)/θJA or the number given in the Absolute Maximum Ratings, whichever is lower. For the LM4880, TJMAX = 150˚C,

and the typical junction-to-ambient thermal resistance is 170˚C/W for package M08A and 107˚C/W for package N08E.

Note 4: Human body model, 100 pF discharged through a 1.5 k

Ω resistor.

Note 5: Machine model, 220 pF–240 pF discharged through all pins.

Note 6: Typicals are measured at 25˚C and represent the parametric norm.

Note 7: Limits are guaranteed to National’s AOQL (Average Outgoing Quality Level).

LM4880M Datasheet(PDF) 3 Page - National Semiconductor (TI)

LM4880M Datasheet(HTML) 3 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Datasheet Download

Link URL