Note 3: The inputs are shunted with three series-connected diodes back-to-back for input differential clamping. Therefore differential input voltages greater than

about 1.8V will cause excessive current to flow unless limited to less than 10 mA.

Note 4: Current limiting protects the output from a short to ground or any voltage less than the supplies. With a continuous overload, the package dissipation must

be taken into account and heat sinking provided when necessary.

Note 5: Devices must be derated using a thermal resistance of 90˚C/W for the N and WM packages.

Note 6: Limits are guaranteed by testing or correlation.

Typical Performance Characteristics

Input Bias Current

DS010254-25

Input Noise Voltage

DS010254-26

Common Mode Limits

DS010254-27

Common Mode Rejection

DS010254-28

Power Supply Rejection

DS010254-29

Frequency Response

High Frequency

DS010254-30

Unity Gain Bandwidth

DS010254-31

Unity Gain Bandwidth

vs Output Load

DS010254-32

Large Signal Response

(Sine Wave)

DS010254-33

www.national.com

4