For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

4

4

4 - 5

Evaluation PCB

the circuit board used in the application should use

rF circuit design techniques. signal lines should

have 50 ohm impedance while the package ground

leads and backside ground slug should be con-

nected directly to the ground plane similar to that

shown. A sufficient number of via holes should be

used to connect the top and bottom ground planes.

the evaluation circuit board shown is available

from Hittite upon request. this evaluation board is

designed for single ended input testing. J2 and J3

provide differential output signals.

item

Description

J1 - J3

PcB Mount sMA rF connector

J4, J5

Dc Pin

c2 - c5

100 pF capacitor, 0402 Pkg.

c6

1000 pF capacitor, 0603 Pkg.

c1

2.2 uF tantalum capacitor

u1

HMc494LP3 / HMc494LP3e Divide-by-2

107197 eval Board

[1] reference this number when ordering complete evaluation PcB

[2] circuit Board Material: rogers 4350

List of Materials for Evaluation PCB

SMT GaAs HBT MMIC

DIVIDE-BY-8, DC - 18 GHz

v05.1211

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D