HMC753

Data Sheet

Rev. D | Page 12 of 13

Table 5. List of Materials for Evaluation PCB

122826-HMC753LP4E1

Item

Description

J5, J6

SMA connectors

J1 to J4

DC pins

C1 to C3

100 pF capacitors, 0402 package

C4 to C6

10,000 pF capacitors, 0603 package

C7 to C9

4.7 µF capacitors, tantalum

U1

HMC753 amplifier

122824-2 evaluation PCB

1

Reference this number when ordering the complete evaluation PCB.

2

Circuit board material: Rogers 4350 or Arlon 25FR.

It is recommended that the circuit board used in this application

use RF circuit design techniques. It is also recommended that

signal lines have a 50 Ω impedance, and the package ground

leads and exposed pad be connected directly to the ground

plane, as shown in Figure 22. Use a sufficient number of via

holes to connect the top and bottom ground planes. Mount the

evaluation board to an appropriate heat sink. The evaluation

circuit board shown is available from Analog Devices, Inc.,

upon request.