D5: T_CRIT mask for Diode 1, when set to 1 a Diode 1 temperature reading that exceeds T_CRIT setpoint will not activate the

T_CRIT_A pin.

D4: T_CRIT mask for Diode 2, when set to 1 a Diode 2 temperature reading that exceeds T_CRIT setpoint will not activate the

T_CRIT_A pin.

D3: T_CRIT mask for Diode 3, when set to 1 a Diode 3 temperature reading that exceeds T_CRIT setpoint will not activate the

T_CRIT_A pin.

D2: T_CRIT mask for Local reading, when set to 1 a Local temperature reading that exceeds T_CRIT setpoint will not activate

the T_CRIT_A pin.

D1: INT active state inversion. When INT Inversion is set to a 1 the active state of the INT output will be a logical high. A low would

then select an active state of a logical low.

D6 and D0: These bits are always set to 0 and reserved for future use. A write of 1 will return a 0 when read.

2.6 LOCAL, DIODE 1, DIODE 2 and DIODE 3 HIGH SETPOINT REGISTERS (LHS, D1RHS, D2RHS and D3RHS)

(Read Address 05h, 07h, 38h, 3Ah /Write Address 0Bh, 0Dh,

50h, 52h):

D7

D6

D5

D4

D3

D2

D1

D0

MSB

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

LSB

D7–D0: HIGH setpoint temperature data. Power up default is LHIGH = RD1HIGH=RD2HIGH=RD3HIGH = 127˚C.

2.7 T_CRIT REGISTER (TCS)

(Read Address 42h/Write Address 5Ah):

D7

D6

D5

D4

D3

D2

D1

D0

MSB

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

LSB

D7–D0: T_CRIT setpoint temperature data. Power up default is T_CRIT = 127˚C.

www.national.com

15