LMC6044AIN datasheet(4/12 Pages) NSC

4 / 12 page

AC Electrical Characteristics (Continued)

Unless otherwise specified, all limits guaranteed for T

A = TJ = 25˚C. Boldface limits apply at the temperature extremes. V

+ =

5V, V

− = 0V, V

CM = 1.5V, VO = V

+/2, and R

L > 1M unless otherwise specified.

Typical

LMC6044AI

LMC6044I

Units

Symbol

Parameter

Conditions

(Note 5)

Limit

(Limit)

(Note 6)

T.H.D.

Total Harmonic

F = 1 kHz, A

V = −5

Distortion

L = 100 kΩ,VO = 2Vpp

0.01

±5V Supply

Note 1: Absolute Maximum Ratings indicate limts beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is in-

tended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The

guaranteed specifications apply only for the test conditions listed.

Note 2: Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the

maximum allowed junction temperature of 110˚C. Output currents in excess of ±30 mA over long term may adversely affect reliability.

Note 3: The maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(max)

−TA)/θJA.

Note 4: Human body model, 1.5 k

Ω in series with 100 pF.

Note 5: Typical Values represent the most likely parametric norm.

Note 6: All limits are guaranteed at room temperature (standard type face) or at operating temperature extremes (bold face type).

Note 7: V+ = 15V, VCM = 7.5V and RL connected to 7.5V. For Sourcing tests, 7.5V ≤ VO ≤ 11.5V. For Sinking tests, 2.5V ≤ VO ≤ 7.5V.

Note 8: V+ = 15V. Connected as Voltage Follower with 10V step input. Number specified in the slower of the positive and negative slew rates.

Note 9: Input referred V+ = 15V and RL = 100 kΩ connected to V

+/2. Each amp excited in turn with 100 Hz to produce V

O = 12 VPP.

Note 10: For operating at elevated temperatures, the device must be derated based on the thermal resistance

θJA with PD = (TJ −TA)/θJA.

Note 11: All numbers apply for packages soldered directly into a PC poard.

Note 12: Do not connect output to V+ when V+ is greater than 13V or reliability may be adversely affected.

Typical Performance Characteristics V

S = ±7.5V, TA = 25˚C unless otherwise specified

Supply Current vs

Supply Voltage

DS011138-19

Offset Voltage vs

Temperature of Five

Representative Units

DS011138-20

Input Bias Current

vs Temperature

DS011138-21

Input Bias Current vs

Input Common-Mode

Voltage

DS011138-22

Input Common-Mode

Voltage Range vs

Temperature

DS011138-23

Output Characteristics

Current Sinking

DS011138-24

LMC6044AIN Datasheet(PDF) 4 Page - National Semiconductor (TI)

LMC6044AIN Datasheet(HTML) 4 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Datasheet Download

Link URL