INA230

SBOS601

– FEBRUARY 2012

www.ti.com

SMBus Alert Response

The INA230 is designed to respond to the SMBus alert response address. The SMBus alert response provides a

quick fault identification for simple slave devices. When an alert occurs, the master can broadcast the alert

response slave address (0001 100) with the Read/Write bit set high. Following this alert response, any slave

devices that generated an alert identify themselves by acknowledging the alert response and sending their

respective address on the bus.

more than one slave attempts to respond, bus arbitration rules apply. The losing device does not generate an

acknowledge and continues to hold the ALERT line low until the interrupt is cleared.

28

Submit Documentation Feedback

Copyright

© 2012, Texas Instruments Incorporated

Product Folder Link(s): INA230