TUSB8044 datasheet(35/61 Pages) TI1

35 / 61 page

TUSB8044

www.ti.com

SLLSEW5 – APRIL 2017

Product Folder Links: TUSB8044

Submit Documentation Feedback

8.5.19 Device Configuration Register 3

Figure 20. Register Offset 25h

Bit No.

Reset State

Table 26. Bit Descriptions – Device Configuration Register 3

Bit

Field

Type

Description

7:5

RSVD

Reserved. Read only, returns 0 when read.

USB2.0_only

USB 2.0 hub reports as 2.0 only. This bit disables the USB 2.0 hub

from reporting 5Gbps support in the wSpeedsSupported field of the

USB SS BOS SS device capability descriptor. This bit will also disable

the USB3.0 hub.

This bit is read/write but the read value returned is the Boolean OR of

this bit and the corresponding eFuse bit. If either bit is set, this feature

is enabled.

Reserved

Switch to reserved

I2C_100k

R/W

I2C 100kHz. This bit controls the clock rate of the I2C master for both

USB to I2C requests . The EEPROM reads will occur at 400K unless

eFuse is used to set the rate to 100k.

This bit is read/write but the read value returned is the Boolean OR of

this bit and the corresponding eFuse bit. If either bit is set, this feature

is enabled.

Galaxy_Enz

R/W

Disable Galaxy compatible modes. When this field is high, Galaxy

charging compatible mode will not be included in AUTOMODE charger

sequence.

This bit is read/write but the read value returned is the Boolean OR of

this bit and the corresponding eFuse bit. If either bit is set, this feature

is disabled.

FullAutoEn

R/W

Enable all divider battery charging modes. When automode is enabled

and this bit is set, any DS port enabled for battery charging will attempt

all divider battery charging modes before DCP, starting with the

highest current option.

The bit is writable, but the value read back is the Boolean OR of this

bit and the corresponding eFuse control.

If either bit is set, eFuse or this register, this feature is enabled.

8.5.20 USB 2.0 Only Port Register

Figure 21. Register Offset 26h

Bit No.

Reset State

Table 27. Bit Descriptions – USB 2.0 Only Port Register

Bit

Field

Type

Description

7:4

RSVD

Reserved. Read only, returns 0 when read.

3:0

USB2_ONLY[3:0]

RO/RW

USB 2.0 Only Ports. The bits in this field primarily indicate whether a

port is enabled only for USB 2.0 operation. This field is read-only

unless customRmbl bit is set. Also, these bits will override the

corresponding USED bit.

A value of 0 indicates the hub port is enabled for both USB 3.1 and

USB 2.0.

A value of 1 indicates the hub port is enabled only for USB 2.0

operation.

TUSB8044 Datasheet(PDF) 35 Page - Texas Instruments

TUSB8044 Datasheet(HTML) 35 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61

Datasheet Download

Link URL