| Electronic Components Datasheet Search |
|
AD9200ARS Datasheet(PDF) 18 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD9200ARS Datasheet(HTML) 18 Page - Analog Devices |
|
18 / 25 page ![]() AD9200 –17– REV. E Figures 35–38 combine the dual-tone SFDR as well as single tone SFDR and SNR performance at IF frequencies of 45 MHz, 70 MHz, 85 MHz and 135 MHz. Note, the SFDR vs. ampli- tude data is referenced to dBFS while the single tone SNR data is referenced to dBc. The performance characteristics in these figures are representative of the AD9200 without the AD8009. The AD9200 was operated in the differential mode (via trans- former) with a 1 V span at 20 MSPS. The analog supply (AVDD) and the digital supply (DRVDD) were set to +5 V and 3.3 V, respectively. 90 80 0 –60 0 –40 –20 70 60 30 20 INPUT POWER LEVEL – dBFS 50 40 10 –10 –50 –30 SINGLE TONE SFDR DUAL TONE SFDR SNR CLK = 20MSPS SINGLE TONE – 45.52MHz DUAL TONE – F1 = 44.49MHz – F2 = 45.52MHz Figure 35. SNR/SFDR for IF @ 45 MHz 90 80 0 –60 0 –40 –20 70 60 30 20 INPUT POWER LEVEL – dBFS 50 40 10 –10 –50 –30 SINGLE TONE SFDR DUAL TONE SFDR SNR CLK = 21.538MSPS SINGLE TONE – 70.55MHz DUAL TONE – F1 = 69.50MHz – F2 = 70.55MHz Figure 36. SNR/SFDR for IF @ 70 MHz Although not presented, data was also taken with the insertion of an AD8009 gain stage of 32 dB in the signal path. No degradation in two-tone SFDR vs. amplitude was noted at an IF of 45 MHz, 70 MHz and 85 MHz. However, at 135 MHz, the AD8009 became the limiting factor in the distortion perfor- mance until the two input tones were decreased to –15 dBFS from their full-scale level of –6.5 dBFS. Note: the SNR perfor- mance in each case degraded by approximately 0.5 dB due to the AD8009’s in-band noise contribution. 90 80 0 –60 0 –40 –20 70 60 30 20 INPUT POWER LEVEL – dBFS 50 40 10 –10 –50 –30 SINGLE TONE SFDR DUAL TONE SFDR SNR CLK = 20MSPS SINGLE TONE – 85.52MHz DUAL TONE – F1 = 84.49MHz – F2 = 85.52MHz Figure 37. SNR/SFDR for IF @ 85 MHz 90 80 0 –60 0 –40 –20 70 60 30 20 INPUT POWER LEVEL – dBFS 50 40 10 –10 –50 –30 SINGLE TONE SFDR DUAL TONE SFDR SNR CLK = 20MSPS SINGLE TONE – 135.52MHz DUAL TONE – F1 = 134.44MHz – F2 = 135.52MHz Figure 38. SNR/SFDR for IF @ 135 MHz |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |