FUNCTION DESCRIPTION

SM3015 has two control types : panel keypad and infrared remote control.

There are four to eight control signal operations :

* Start-up by SPEED key

a. function turn off (OFF key)

b. wind mode select (MODE key)

c. start-up function and wind speed select (SPEED key)

d. timer setting (TIMER key)

e. swing head or tuner for swing angle (SW1 and SW2 key)

f. lighting control (LIGHT key)

* Start-up by ON/OFF key

a. function control (ON/OFF key)

b. wind mode select (MODE key)

c. wind speed select (SPEED key)

d. timer setting (TIMER key)

e. swing head or tuner for swing angle (SW1 and SW2 key)

f. lighting control (LIGHT key)

All functions can be planned by user like an MCU for more product application.

Only SPEED or ON/OFF key can enable the fan controller, except for the light control. Wind mode,

timer and swing head inputs can not be accepted when fan is not activated. The fan controller will be

turned off by timer and OFF (ON/OFF) key inputs.

When more than one key are pressed, controller will not accept the multi-key's control signal, if the

panel keys are pressed more than six seconds, controller will generate a " BI-BI-BI-BI" warning sound.

When fan is enabled by SPEED or ON/OFF key, the initial state of fan controller is as follows:

* Memory function available

If Fan controller is OFF on sleep mode, all memory functions will be returned to the LAST TURN

ON STATE.

a.Grade as last state but with starting medium wind for three seconds (MASK option)

b. The wind mode as last state except sleep mode

c. Swing function as last state

d. Timer setting off

e. Light is independent

* Non-memory function (Bonding option)

a. Grade is low wind function but with starting medium wind for three seconds (MASK option)

b. Normal wind mode operation

c. Timer setting and swing head off

d. Light is independent

Page 5

V.2.0 Mar 8, 2002

SM3015

三合微科股份有限公司

REMOTE FAN MCU