| Electronic Components Datasheet Search |
|
SSD1852Z Datasheet(PDF) 14 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
SSD1852Z Datasheet(HTML) 14 Page - List of Unclassifed Manufacturers |
|
14 / 55 page ![]() SSD1852 Rev 1.0 01/2003 SOLOMON 9 6.9 REF This pin is an input pin to enable the internal reference voltage used for the internal regulator. When it is high, an internal reference voltage source will be used. When it is low, an external reference voltage source must be provided in VEXT pin if internal regulator is used. 6.10 VDD Power supply pin. 6.11 VSS Ground. 6.12 VCI Reference voltage input for internal DC-DC converter. The voltage of generated VCC equals to the multiple factor (3X, 4X, 5X or 6X) times VCI with respect to VSS. Note: voltage at this input pin must be larger than or equal to VDD. 6.13 VCC This is the most positive voltage supply pin of the chip. It can be supplied externally or generated by the internal DC-DC converter. When using internal DC-DC converter as generator, voltage at this pin is for internal reference only. It CANNOT be used for driving external circuitry. 6.14 C1P,C2P,C3P,C4P,C5P,C1N and C2N When internal DC-DC voltage converter is used, external capacitor(s) is/are connected among these pins. 6.15 VL6 This pin is the most positive LCD driving voltage. It can be supplied externally or generated by the internal regulator. 6.16 VR This pin is an input of the internal voltage regulator. When the internal resistors network for the voltage regulator is disabled (INTRS is pulled low), external resistors should be connected between VSS and VR, and VR and VL6, respectively. 6.17 VEXT This pin is an input to provide an external voltage reference for the internal voltage regulator when REF pin is pulled L. When internal reference is selected (REF is pulled high), the VEXT pin should be left open (No connection). 6.18 VL5, VL4, VL3, and VL2 LCD driving voltages. They can be supplied externally or generated by the internal bias divider. They have the following relationship: VL6 > VL5 > VL4 > VL3 > VL2 > VSS 1:a bias VL5 (a-1)/a*VL6 VL4 (a-2)/a*VL6 VL3 2/a*VL6 VL2 1/a*VL6 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |