3

Assembly Instruction

Assembly Instructions

1. TRIM CABLE JACKET ONLY, AS SHOWN ABOVE.

2. SLIDE BACK NUT ONTO CABLE UNTIL TRIMMED END OF JACKET IS FLUSH WITH FRONT

OF NUT. SOLDER NUT TO CABLE.

3. TRIM DIELECTRIC AS SHOWN.

4. INSTALL INSULATOR OVER CABLE CENTER CONDUCTOR.

5. SOLDER CONTACT TO CENTER CONDUCTOR.

6. INSERT CABLE ASSEMBLY INTO CONNECTOR BODY AND TIGHTEN TO 35-45 INCH-

OUNCES TORQUE.

PE45366 REV 1.0

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: SSMC Plug Connector Clamp/Solder Attachment for PE-047SR, PE-SR047AL, PE-SR047FL

PE45366

RF Connectors Technical Data Sheet

PE45366

SSMC Plug Connector Clamp/Solder Attachment

for PE-047SR, PE-SR047AL, PE-SR047FL