3

Assembly Instruction

Assembly Instructions

1. TRIM CABLE AS SHOWN ABOVE.

2. INSERT CABLE INTO BODY. CABLE JACKET SHOULD BOTTOM ON STEP INSIDE BODY

AND CENTER CONDUCTOR SHOULD LIE IN SLOT OF CONTACT. FIXTURE IN THIS

POSITION.

3. SOLDER CENTER CONDUCTOR TO CONTACT.

4. SOLDER CABLE JACKET TO CONNECTOR BODY. DO NOT DISTURB JOINT UNTIL IT

HAS COOLED. CLEAN FLUX RESIDUE.

5. PRESS INSULATOR AND END CAP INTO CONNECTOR BODY AND USE A FLAT BOTTOM

ARBOR TO PRESS CAP IN PLACE. CAP MUST BE BELOW BODY SURFACE TO SEAT

PROPERLY.

PE45385 REV 1.0

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: SSMC Plug Right Angle Connector Solder Attachment for PE-047SR, PE-SR047AL, PE-

SR047FL PE45385

RF Connectors Technical Data Sheet

PE45385

SSMC Plug Right Angle Connector Solder Attachment

for PE-047SR, PE-SR047AL, PE-SR047FL