MP6003DN datasheet(9/15 Pages) MPS

Part #	MP6003DN

Description	Monolithic Flyback/SEPIC DC-DC Converter

PDF	15 Pages

Scroll/Zoom	100%

Manufacturer	MPS [Monolithic Power Systems]

Direct Link	http://www.monolithicpower.com

Logo

9 / 15 page

MP6003 – MONOLITHIC FLYBACK/SEPIC DC-DC CONVERTER

MP6003 Rev. 1.01

www.MonolithicPower.com

1/26/2014

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

Limiting the duty cycle at high line voltage

protects against magnetic saturation and

minimizes

the

output

sensitivity

line

transients.

Auto-Restart

When VCC is biased from an auxiliary winding

and an open loop condition occurs, the voltage

at the VCC pin increases to 6.5V. When VCC

crosses the threshold voltage, the auto-restart

circuit turns off the power switch and puts the

controller in standby mode. When VCC drops to

4.5V, the startup switch turns on to charge VCC

up again. When VCC crosses 6.0V, the switch

turns off and the standby current discharges

VCC back to 4.5V. After repeating the ramp

cycles between the two threshold voltages 15

times, the auto-restart circuit is disabled and the

controller begins soft-start.

MP6003DN Datasheet(PDF) 9 Page - Monolithic Power Systems