- 3 -

Application

Bond strength is dependent upon the amount of adhesive-to-surface

Techniques

contact developed. Firm application pressure helps develop better adhesive

contact and improves bond strength.

To obtain optimum adhesion, the bonding surfaces must be clean,

dry and well unified. Some typical surface cleaning solvents are isopropyl

alcohol or heptane.

Note: Carefully read and follow the manufacturer’s precautions and directions for

use when working with solvents.

Ideal tape application temperature range is 70°F to 100°F (21°C to38°C). Initial

tape application to surfaces at temperatures below 50°F (10°C) is not recommended

because the adhesive becomes too firm to adhere readily. However, once properly

applied, low temperature holding is generally satisfactory.

General

All tapes have a tissue carrier, which can add dimensional stability to

Information

foams and other substrates. The carrier also provides easier handling during

slitting and die-cutting.

Features

3M™ Adhesive is a medium-firm acrylic adhesive system featuring both high

initial adhesion and good high temperature holding power.

Application

• Nameplate bonding

Ideas

• Plastic film lamination/bonding

• Foam bonding

Application

Equipment

To apply adhesives in a wide web format, lamination equipment is required to

ensure acceptable quality. To learn more about working with pressure-sensitive

adhesives please refer to technical bulletin, Lamination Techniques for

Converters of Laminating Adhesives.

For additional dispenser information, contact your local 3M sales

representative.