1

2

5

6

3

4

Figure 1. R-GAGE features

1. Output LEDs: Yellow (output 1 energized); Red

(configuration)

2. Output LEDs: Yellow (output 2 energized); Red

(configuration)

3. Power LED: Green (power ON)

4. Signal Strength LED: Red (flashes in proportion to

the signal strength)

5. DIP switch row A

6. DIP switch row B

Access the DIP switches behind the threaded cap on the

sensor side

D

X

Y

A

B

Zone 1

Zone 2

Figure 2. R-GAGE setpoint distances

EU, CN Model

US Model

X

Minimum Zone 1 setpoint distance

2 m (6.6 ft)

3.5 m (11.5 ft)

Y

Maximum Zone 1 setpoint distance

30 m (98.4 ft)

30 m (98.4 ft)

A

Minimum Zone 2 (offset from Zone 1: 2 m to 25 m)

4 m (13.1 ft)

5.5 m (18.0 ft)

B

Maximum Zone 2 (offset from Zone 1: 2 m to 25 m)

55 m (180.4 ft)

55 m (180.4 ft)

D

Dead Zone1

Sensor Configuration

The sensitivity and output configuration can be selected via the DIP switches on the side of the sensor. Use the included

spanner to open the screw-off cover on the side of the sensor and access the DIP switches.

Important: Tighten the DIP switch cover a full quarter turn after contact to maintain the watertight

seal.

DIP Switch Functions

Switches

Function

A1, A2, A3, A4

Zone 1 Distance (detects objects from sensor face to this point)

A5, A6, A7

Zone 2 Distance, Offset from Zone 1

1 Typical dead zone: 0.4 m (1.3 ft) for moving and 1.0 m (3.3 ft) for stationary targets, but varies with target reflectivity.

2

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 184564 Rev. C