Assembly Options

White DIP Switches

1

2

3

4

5

6

Position

Module 1

ON

Module 2

ON

Module 3

ON

Module 4

ON

Module 5

ON

Module 6

ON

Specifications

Supply Voltage and Current

12 V dc to 30 V dc

Maximum current in high intensity mode: 350 mA max. at 12 V dc; 170 mA typical at

24 V dc

Maximum current in low intensity mode: 140 mA max. at 12 V dc; 70 mA typical at 24

V dc

Supply Protection Circuitry

Protected against transient voltages

Indicator Response Time

Off Response: 150 µs (maximum) at 12 V dc to 30 V dc

On Response: 40 ms (maximum) at 12 V dc; 50 ms (maximum) at 30 V dc

Indicator Characteristics

Color

Dominant Wavelength (nm) or

Color Temperature (CCT)

Color Coordinates1

Lumen Output

(Typical at 25 °C)

x

y

Red

622

0.694

0.304

27.4

Green

527

0.177

0.707

69

Yellow

575

0.456

0.489

46.6

Blue

472

0.128

0.080

17.4

Magenta

–

0.371

0.176

24

Cyan

493

0.161

0.347

49.5

White

5600 K

0.310

0.335

40.9

Amber

589

0.542

0.422

39.9

Rose

–

0.497

0.226

26.6

Lime

Green

561

0.369

0.556

53.8

Orange

600

0.606

0.372

35.5

Sky Blue

486

0.146

0.251

41.7

Violet

–

0.222

0.117

21.3

Spring

Green

508

0.166

0.531

62.4

Required Overcurrent Protection

WARNING: Electrical connections must be made by

qualified personnel in accordance with local and

national electrical codes and regulations.

Overcurrent protection is required to be provided by end product application per the

supplied table.

Overcurrent protection may be provided with external fusing or via Current Limiting,

Class 2 Power Supply.

Supply wiring leads < 24 AWG shall not be spliced.

For additional product support, go to

www.bannerengineering.com.

Supply Wiring (AWG)

Required Overcurrent Protection (Amps)

20

5.0

22

3.0

24

2.0

26

1.0

28

0.8

30

0.5

Construction

Bases, segments, covers: polycarbonate

Leakage Current Immunity

550 µA

Operating Conditions

–40 °C to +50 °C (–40 °F to +122 °F)

95% at +50 °C maximum relative humidity (non-condensing)

Environmental Rating

IEC IP65

Vibration and Mechanical Shock

Vibration 10 Hz to 55 Hz 0.5 mm p-p amplitude per IEC 60068-2-6

Shock 15G 11 ms duration, half sine wave per IEC 60068-2-27

Certifications

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge,

any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or

the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER

PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR

FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner

Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such

purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this

document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is

provided in any other language. For the most recent version of any documentation, refer to:

www.bannerengineering.com.

1

Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates.

TL70 Multicolor RGB Tower Light Module