EMC1813 datasheet(46/102 Pages) MICROCHIP

46 / 102 page

Value

Description

The temperature measurement range is -64°C to +191.875°C and the data format is offset

binary (see Table 5-1)

The temperature measurement range is 0°C to +127.875°C and the data format is binary

Bit 1 – DA_ENA Enables the dynamic averaging feature on all temperature channels.

Value

Description

The dynamic averaging feature is enabled. All temperature channels will be converted with

an averaging factor that is based on the conversion rate, as shown in Table 5-3.

The dynamic averaging feature is disabled. All temperature channels will be converted with a

maximum averaging factor of 1x (equivalent to 11-bit conversion). For higher conversion

rates, this averaging factor will be reduced, as shown in Table 5-4

Bit 0 – APDD Disables the anti-parallel diode operation only allowing each APD pin set to bias and

measure one diode.

Value

Description

Anti-Parallel Diode mode is disabled. Only one external diode will be measured on the

DP1/DN1 and DP2/DN2 pins

Anti-Parallel Diode mode is enabled. Two external diodes will be measured on the DP1/DN1

and DP2/DN2 pins

Multi-Channel Low-Voltage Remote Di...

System Management Bus Protocol

Datasheet

DS20005751A-page 46

EMC1813 Datasheet(PDF) 46 Page - Microchip Technology