testo 635

Accessories

0554 0549

0554 0568

0554 0610

0520 0006

0520 0071

0520 0136

0520 0185

0520 0106

0520 0013

0520 0083

0520 0206

0520 0213

0520 0283

0520 0481

0520 0981

Testo fast printer IRDA with wireless infrared interface; 1 roll thermal paper; 4 AA batteries

Spare thermal paper for printer (6 rolls), permanent ink

External fast charger for 1-4 AA rech. batteries, incl. 4 Ni-MH rech. batteries with individual cell charging and charge

control display, incl. impulse trickle charging, integrated discharge function, with built-in international mains plug,

100-240 V, 300 mA, 50/60 Hz

ISO calibration certificate humidity, Calibration points 11.3 %RH and 75.3 %RH at +25 °C

ISO calibration certificate/temperature, meas. instr. with surface probe; calibration points +60°C; +120°C; +180°C

ISO calibration certificate dewpoint, two adjustment points -10/-40 °Ctd at 6 bar

ISO calibration certificate/absolute pressure, 3 meas. points distributed over meas. range

Absolute pressure; accuracy 0.1 to 0.6; 3 points distributed over meas. range (0 to 70 bar)

ISO calibration certificate/humidity

cal. points freely selectable from 5 to 95%RH at +15 to +35°C or at -18 to +80°C

ISO calibration certificate/humidity, saturated saline solutions: calibration point 11.3%RH

ISO calibration certificate/humidity, saturated saline solutions, calibration point 75.3%RH

DAkkS calibration certificate/humidity, electronic hygrometers; calibration points 11.3%RH and 75.3%RH at +25°C

DAkkS calibration certificate/humidity, saturated saline solutions; calibration point 11.3%RH

DAkkS calibration certificate/humidity, saturated saline solutions; calibration point 75.3%RH

ISO calibration certificate/U-value probe

DAkkS calibration certificate/U-value probe

Transport and Protection

Additional accessories and spare parts

Printer and Accessories

Calibration Certificates

We measure it.

0516 0035

0516 0435

0554 0660

0554 0756

0554 2140

0554 0447

0515 0028

0554 0761

Service case for basic equipment of measuring instrument and probes, dimensions: 400 x 310 x 96 mm

Service case for measuring instrument, probe and accessories, dimensions 520 x 380 x 120 mm

Control and adjustment set for Testo humidity probes, salt solution with 11.3% RH and 75.3% RH, incl. adapter for

Testo humidity probes

Sintered PTFE filter, Ø 12 mm, for corrosive media

High humidity range (long-term measurements), high flow velocities.

Cap for bore holes, for humidity probe Ø 12 mm

Measures equilibrium moisture in bore holes

Plug-in mains adapter, 5 VDC 500 mA with European adapter, 100-250 VAC, 50-60 Hz

Lithium battery button cell, CR2032 AA batteries for radio handle

Adhesive material for fixing and sealing

Part no.

0554 0641

Stainless steel sintered filter, pore size 100 μm, probe protection in dusty atmospheres or higher flow velocities

testo-635-P03

13.11.2013

14:48

Seite 3