AM29LV033MU datasheet(55/56 Pages) AMD

55 / 56 page

November 11, 2002

Am29LV033MU

ADV ANCE

I N FO RMAT I O N

REVISION SUMMARY

Revision A (June 20, 2002)

Initial release.

Revision A+1 (September 3, 2002)

MIRRORBIT 64 MBIT Device Family

Added 64 Fortified BGA to LV640MU device.

Alternate CE# Controlled Erase and Program

Operations

Added t

RH parameter to table.

Erase and Program Operations

Added t

BUSY parameter to table.

Figure 16. Program Operation Timings

Added RY/BY# to waveform.

TSOP and BGA PIN Capacitance

Added the FBGA package.

Program Suspend/Program Resume Command

Sequence

Changed 15

µs typical to maximum and added 5 µs

typical.

Erase Suspend/Erase Resume Commands

Changed typical from 20

µs to 5 µs and added a maxi-

mum of 20

µs.

Product Selector Guide

Added Note 2.

Added 101R, 112R, and 120R to Speed Options.

Connection Diagrams

Changed pin 30 from the 40-pin standard TSOP and

pin 11 from the 40-pin reverse TSOP from V

CC to VIO.

Ordering Information

Added 101R, 112R, and 120R to Valid Combinations

Table.

Added Note 1.

Replaced 48-Pin Reverse and Standard Pinout Pack-

age to 40-Pin Reverse and Standard Pinout Package.

Read-Only Operations, Alternate CE# Controlled

Erase and Program Operations, and Erase and

Program Operations

Added 101R, 112R, and 120R to Speed Options.

Physical Dimensions

Replaced TS 048 and TSR048 Package drawing to

TS 040 and TSR040 Package drawing.

Revision A+2 (November 11, 2002)

Product Selector Guide and Read Only Operations

Added a 30 ns Page Access time and Output Enable

Access time to the 113R and 123R Speed Options.

Ordering Information and Physical Dimensions

Removed FBD048 package.

Added FBC048 package.

Changed order numbers and package markings to re-

flect new package.

Customer Lockable: SecSi Sector NOT

Programmed or Protected at the factory.

Added second bullet, SecSi sector-protect verify text

and figure 3.

SecSi Sector Flash Memory Region, and Enter

SecSi Sector/Exit SecSi Sector Command

Sequence

Noted that the ACC function and unlock bypass modes

are not available when the SecSi sector is enabled.

Byte/Word Program Command Sequence, Sector

Erase Command Sequence, and Chip Erase Com-

mand Sequence

Noted that the SecSi Sector, autoselect, and CFI

functions are unavailable when a program or erase

operation is in progress.

Common Flash Memory Interface (CFI)

Changed wording in last sentence of third paragraph

from, “...the autoselect mode.” to “...reading array

data.”

Changed CFI website address.

Erase and Programming Performance

Changed the typicals and/or maximums of the Chip

Erase Time, Effective Write Buffer Program Time,

Byte/Word Program Time, and Accelerated Effective

Program Time to TBD.

AM29LV033MU Datasheet(PDF) 55 Page - Advanced Micro Devices

AM29LV033MU Datasheet(HTML) 55 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Datasheet Download

Link URL