NOTES:

The connection circuit shown above is for the MSK 1932-0 evaluation board. The Rp and Lp are external compo-

nents and must not be located near ground planes if possible. A high quality resistor such as Bradford Electronics P/

N FP10-400 is required for optimum response times. Use an inductor with a high self-resonant frequency that can

withstand the currents required for the application.

When using the other variants of the MSK 1932, place an additional bypass capacitor on pins 12 and 13 if series

For additional applications information, please contact the factory. Evaluation amplifiers with test boards are

readily available for MSK.

TYPICAL CONNECTION CIRCUIT

Rev. B 8/00

5