Features

SOD-123FL

●

For surface mounted applications in order to

RoHS

●

Low profile space

COMPLIANT

●

Glass passivated chip

●

Low inductance

●

Very fast response time

●

Mechanical Data

●

Case: SOD-123FL molded plastic

●

Polarity: Color band denotes cathode

Note: Products with logo

or

are made by HY Electronic (Cayman) Limited.

Applications

●

Use in sensitive electronics protection against voltage

transients induced by inductive load switching

and lighting on ICs,MOSFET。

Maximum Ratings and Electrical Characteristics

Rating at 25℃ ambient temperature unless otherwise specified.

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Characteristics

Symbol

Unit

Peak Pulse Power Dissipation with a 10/1000µs

Waveform (See Fig. 1)

Peak Forward Surge Current 8.3ms Single Half Sine-Wave

A

Peak Pulse Current with a Waveform (See Fig. 3 , Single Pulse)

A

Typical Thermal Resistance Junction to Ambient (Note1)

℃/W

Typical Thermal Resistance Junction to Lead (Note1)

℃/W

Junction Temperature Range

℃

Storage Temperature Range

℃

2. 8.3ms single half sine-wave duty cycle= 4 pulses per minutes maximum (uni-directional units only)

3. The typical data above is for reference only .

SMF*-7-99-00/01

Rev. 11, 18-May-2020

-55 to + 150

See Next Table

-55 to + 150

120.0

30.0

20

200

W

Notes: 1. Mounted on P.C.B. with 0.036 x 0.06” (0.9 x 1.5mm) copper pad areas.

SMF SERIES

Surface Mount Unidirectional and Bidirectional

Transient Voltage Suppressors

Value

Pb

Reverse Voltage 5.0 - 170 Volts

Power Dissipation - 200 Watts

optimize board space

Package Outline Dimensions in Inches (Millimeters)

www.hygroup.com.tw