ST7LITE30 datasheet(18/167 Pages) STMICROELECTRONICS

Part #	ST7LITE30

Description	8-BIT MCU WITH SINGLE VOLTAGE FLASH, DATA EEPROM, ADC, TIMERS, SPI, LINSCI

PDF	167 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

18 / 167 page

ST7LITE3

18/167

DATA EEPROM (Cont’d)

5.7 REGISTER DESCRIPTION

EEPROM CONTROL/STATUS REGISTER (EEC-

SR)

Read/Write

Reset Value: 0000 0000 (00h)

Bits 7:2 = Reserved, forced by hardware to 0.

Bit 1 = E2LAT Latch Access Transfer

This bit is set by software. It is cleared by hard-

ware at the end of the programming cycle. It can

only be cleared by software if the E2PGM bit is

cleared.

0: Read mode

1: Write mode

Bit 0 = E2PGM Programming control and status

This bit is set by software to begin the programming

cycle. At the end of the programming cycle, this bit

is cleared by hardware.

0: Programming finished or not yet started

1: Programming cycle is in progress

Note: if the E2PGM bit is cleared during the pro-

gramming cycle, the memory data is not guaran-

teed

Table 3. DATA EEPROM Register Map and Reset Values

E2LAT E2PGM

Address

(Hex.)

Label

0030h

EECSR

Reset Value

E2LAT

E2PGM

ST7LITE30 Datasheet(PDF) 18 Page - STMicroelectronics