SN74HCS237-Q1 Automotive Qualified 3- to 8-Line Decoder/Demultiplexer with

Address Latches and Schmitt-Trigger Inputs

1 Features

• AEC-Q100 Qualified for automotive applications:

– Device temperature grade 1: –40°C to +125°C,

– Device HBM ESD Classification Level 2

– Device CDM ESD Classifcation Level C6

• Wide operating voltage range: 2 V to 6 V

• Schmitt-trigger inputs allow for slow or noisy input

signals

• Low power consumption

– Typical input leakage current of ±100 nA

• ±7.8-mA output drive at 6 V

2 Applications

• Memory device selection with shared data bus

• Reduce required number of outputs for chip select

applications

• Route data

3 Description

The SN74HCS237-Q1 is a three to eight decoder with

latched address inputs, one standard output strobe

latch enable (LE) input is high, the device acts as a

standard three to eight decoder. When the latch

enable (LE) input is low, the address latch retains its

previous state. When the outputs are gated by either

strobe input, they are all forced into the low state.

When the outputs are not disabled by one or both of

the strobe inputs, only the selected output is high

while all others are low.

Device Information

PART NUMBER

PACKAGE(1)

BODY SIZE (NOM)

SN74HCS237PW-Q1

TSSOP (16)

5.00 mm × 4.40 mm

SN74HCS237D-Q1

SOIC (16)

9.90 mm × 3.90 mm

(1)

For all available packages, see the orderable addendum at

the end of the data sheet.

Input Voltage

Schmitt-trigger

CMOS Input

Response

Waveforms

Standard

CMOS Input

Response

Waveforms

Input Voltage

Input Voltage

Time

Time

Input Voltage

Waveforms

Low Power

Noise Rejection

Supports Slow Inputs

Time

Time

Time

Time

Benefits of Schmitt-trigger inputs

www.ti.com

SN74HCS237-Q1

SCLS809 – SEPTEMBER 2020

Copyright © 2020 Texas Instruments Incorporated

Submit Document Feedback

1

Product Folder Links: SN74HCS237-Q1

SN74HCS237-Q1

SCLS809 – SEPTEMBER 2020

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.