PRT2011CVL5A datasheet(13/112 Pages) NXP

13 / 112 page

Modules List

i.MX RT1064 Crossover Processors Data Sheet for Consumer Products, Rev. 2, 08/2020

NXP Semiconductors

QuadTimer1

QuadTimer2

QuadTimer3

QuadTimer4

QuadTimer

Timer Peripherals

The quad-timer provides four time channels with a

variety of controls affecting both individual and

multi-channel features.Specific features include

up/down count, cascading of counters, programmable

module, count once/repeated, counter preload,

compare registers with preload, shared use of input

signals, prescaler controls, independent

capture/compare, fault input control, programmable

input filters, and multi-channel synchronization.

ROMCP

ROM Controller with

Patch

Memories and

Memory Controllers

The ROMCP acts as an interface between the Arm

advanced high-performance bus and the ROM. The

on-chip ROM is only used by the Cortex-M7 core during

boot up. Size of the ROM is 96 KB.

RTC OSC

Real Time Clock

Oscillator

Clock Sources and

Control

The RTC OSC provides the clock source for the

Real-Time Clock module. The RTC OSC module, in

conjunction with an external crystal, generates a 32.768

kHz reference clock for the RTC.

RTWDOG

Watch Dog

Timer Peripherals

The RTWDG module is a high reliability independent

timer that is available for system to use. It provides a

safety feature to ensure software is executing as

planned and the CPU is not stuck in an infinite loop or

executing unintended code. If the WDOG module is not

serviced (refreshed) within a certain period, it resets the

MCU. Windowed refresh mode is supported as well.

SAI1

SAI2

SAI3

Synchronous Audio

Interface

Multimedia

Peripherals

The SAI module provides a synchronous audio

interface (SAI) that supports full duplex serial interfaces

with frame synchronization, such as I2S, AC97, TDM,

and codec/DSP interfaces.

SA-TRNG

Standalone True Random

Number Generator

Security

The SA-TRNG is hardware accelerator that generates

a 512-bit entropy as needed by an entropy consuming

module or by other post processing functions.

SEMC

Smart External Memory

Controller

Memory and

Memory Controller

The SEMC is a multi-standard memory controller

optimized for both high-performance and low pin-count.

It can support multiple external memories in the same

application with shared address and data pins. The

interface supported includes SDRAM, NOR Flash,

SRAM, and NAND Flash, as well as 8080 display

interface.

Table 2. i.MX RT1064 modules list (continued)

Block Mnemonic

Block Name

Subsystem

Brief Description

PRT2011CVL5A Datasheet(PDF) 13 Page - NXP Semiconductors

PRT2011CVL5A Datasheet(HTML) 13 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL