SL3S1205FUD2SLASHHAP datasheet(21/38 Pages) NXP

21 / 38 page

NXP Semiconductors

SL3S1205_15

UCODE 8/8m

de-activated, with a "0" value. The permanent bits can only be toggled by using standard

EPC WRITE (not a BlockWrite) if the EPC bank is unlocked or within the SECURED state

if the EPC is locked. If the EPC is permalocked, they cannot be changed.

Action bits will trigger a certain action only if the pointer of the SELECT command exactly

matches the action-bit address (i.e. 203h or 204h), if the length=1 and if mask=1b (no

multiple triggers of actions possible within one single SELECT command).

If the truncate bit in the SELECT command is set to "1", the SELECT will be ignored. A

SELECT on action bits will not change the digital state of the chip.

The action bits can be triggered regardless if the EPC memory is unlocked, locked or

permalocked.

SL3S1205_15

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3.5 — 1 April 2021

COMPANY PUBLIC

398435

21 / 38

SL3S1205FUD2/HAP Datasheet(PDF) 21 Page - NXP Semiconductors