| Electronic Components Datasheet Search |
|
ADE9153AACPZ Datasheet(PDF) 25 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADE9153AACPZ Datasheet(HTML) 25 Page - Analog Devices |
|
25 / 50 page ![]() Data Sheet ADE9153A Rev. 0 | Page 25 of 50 Reset Energy Register on Read The user can reset the energy register on a read using the RD_RST_EN bit in the EP_CFG register. In this way, the value in the user energy register is reset when it is read. Power Accumulation The ADE9153A accumulates the total active, fundamental reactive, and total apparent powers into the AWATT_ACC, AFVAR_ACC, and AVA_ACC 32-bit signed registers, respectively. This accumulation can be used as an averaged power reading. The number of samples accumulated is set using the PWR_ TIME register. The PWRRDY bit in the status register is set after PWR_TIME + 1 samples accumulate at 4 kSPS. The maximum value of the PWR_TIME register is 8191 decimal, and the maximum power accumulation time is 1.024 sec. The CFxSIGN, AVARSIGN, and AWSIGN bits in the PHSIGN register indicate the sign of accumulated powers over the PWR_TIME interval. When the sign of the accumulated power changes, the corresponding REVx bits in the status register are set and IRQ generates an interrupt. The ADE9153A allows the user to accumulate total active power and fundamental reactive power into separate positive and negative accumulation registers: PWATT_ACC, NWATT_ ACC, PFVAR_ACC, and NFVAR_ACC. A new accumulation from zero begins when the power update interval set in PWR_TIME elapses. No Load Detection Feature The ADE9153A features no load detection for each energy to prevent energy accumulation due to noise. If the accumulated energy over the user defined time period is below the user defined threshold, zero energy is accumulated into the energy register. The NOLOAD_TMR bits in the EP_CFG register determine the no load time period, and the ACT_NL_LVL, REACT_NL_LVL, and APP_NL_LVL registers contain the user defined no load threshold. The no load status is available in the PHNOLOAD register and the status register, which can be driven to the IRQ interrupt pin. AWATT AVA AFVAR CFxSEL 100 000 010 CFxSEL WTHR CFx_LT CF_LTMR CFxDIS 4.096MHz DIGITAL TO FREQUENCY 512 CFxDEN CF_ACC_CLR 0 1 1 CFx PIN PULSE WIDTH CONFIGURATION ADE9153A CFx BITS VATHR VARTHR 100 000 010 Figure 50. Digital to Frequency Conversion for CFx |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |